Verified Events
DateTypeCompanyHeadlineSegment
Weco introduces Denshi wave-energy platform
- The buoy uses a rack-and-pinion mechanism to drive an internal generator and can carry batteries and computing.
- Weco describes a platform under 100 kg and about one metre across, deployed from a small vessel on a single-point mooring.
- The platform targets maritime security, environmental monitoring and offshore infrastructure sensing.
Amprius unveils SiCore 500 cell for uncrewed aviation
- The new cell is rated at 500 Wh/kg at a 1C continuous discharge rate.
- Amprius says the cell can be produced on conventional lithium-ion battery manufacturing equipment.
- Planned formats include customer-specific designs and the SAE JA1016 standard pouch format for small uncrewed aircraft.
Addionics launches low-temperature battery architecture
- The architecture creates additional electrolyte and ion pathways intended to reduce low-temperature transport constraints.
- Target applications explicitly include defense drones, autonomous systems, robotics, space, electric aviation and vehicles.
- The launch concerns a battery architecture and component layer, not a complete battery pack or autonomous platform.
Custom Power launches APTIX intelligent batteries
- APTIX fixes core cell, BMS, firmware and protection elements while allowing configurable harnesses, housings and certification packages.
- The initial CP2135-2 and CP3135-2 modules provide 7.2 V and 10.8 V options.
- Custom Power targets robotics and automation users needing telemetry, predictable behaviour and fleet-level validation.
NEO Battery Materials launches FPV strike-drone battery for loitering-munition use
- NEO Battery Materials announced high-power battery products for FPV strike drones and loitering munitions.
- The launch positions the batteries as a non-Chinese pouch-cell alternative for defense and allied procurement channels.
- The company frames the battery line around high-discharge pouch-cell performance for strike-drone and loitering-munition applications.
Grepow launches TATTU 5.0 smart UAV battery platform
- TATTU 5.0 targets agriculture and logistics UAVs.
- The platform supports 12C continuous discharge and 6C fast charging.
- The system combines high-current cells, BMS control, thermal management and a dedicated fast-charging ecosystem.
Natrion launches Cirrus and Stratus battery cell lines for uncrewed systems
- Natrion announced it will begin production of Cirrus and Stratus, new defense-optimized battery cell product lines for uncrewed, battery-powered systems.
- The cells are designed for drones, surface and underwater vessels, ground vehicles and humanoids, with nearly 80% more energy density than available Li-ion alternatives.
- Natrion said the pouch cells are sized to substitute into battery packs built around 21700-type Li-ion cylindrical cells, with samples shipping for user testing.
Intelligent Energy positions IE-SOAR hydrogen fuel cells for UAV endurance and range
- Intelligent Energy introduced the IE-SOAR range of lightweight hydrogen fuel cell modules for fixed-wing, rotary-wing and VTOL UAV applications.
- The systems are designed to increase UAV endurance and range compared with conventional battery systems.
- IE-SOAR supports hydrogen-powered drone operations where flight time and payload capacity are limiting factors.
WiTricity introduces MR/1 600W wireless charging system for light electric vehicles
- WiTricity introduced the MR/1 600W wireless charging system for golf carts and light electric vehicles.
- The system eliminates exposed contacts and cables, enabling automatic charging when a vehicle parks over the charging pad.
- The product is relevant to autonomous mobility infrastructure because it supports hands-free charging.
Kyten launches custom aerospace battery-pack manufacturing service
- The service targets manned and unmanned aircraft, spacecraft, marine vessels and ground vehicles.
- Kyten disclosed one-week targets for pack design, in-house qualification and transition to volume production.
- Its production model combines adaptive pack architecture, automated testing and software-defined manufacturing for thousands of units per product each year.
Grepow unveils Tattu 4.0 18S smart battery
- The battery targets heavy-lift agricultural spraying and logistics UAVs.
- The system supports rapid charging when paired with compatible high-power charging equipment.
- The design includes a 500A connector and intelligent BMS cycle management.
Amprius reports the introduction of SiCore SA102
- Amprius said the product introduction occurred in April 2025; its shareholder letter was published on 7 August 2025.
- Amprius said SA102 was produced on its Fremont, California pilot line for mission-critical unmanned-aircraft applications.
- The exact cell combines a silicon-anode pouch format with 450 Wh/kg and 950 Wh/L headline energy-density figures.
Natrion launches first U.S.-made active battery separator
- Natrion launched its Gen-1 Active Separator, built on the company patented Lithium Solid Ionic Composite technology.
- The company described it as the first U.S.-made active battery separator of its kind for lithium-ion batteries.
- Natrion said the separator is designed to improve safety, widen operating temperatures, reduce cell degradation and integrate into existing manufacturing infrastructure.
Amprius ships 6.3Ah silicon-anode cylindrical cell to Fortune 500 company
- Amprius shipped a 6.3Ah SiCore 21700 silicon-anode cylindrical cell to a Fortune 500 company.
- The cell delivers 315 Wh/kg, 800 cycles at 80 percent depth of discharge and drop-in compatibility for existing 21700 platforms.
Ampace unveils E30P battery cell at Bharat Battery Show
- Ampace introduced E30P officially on January 19, 2025.
- The cell uses a standardized 35205 cylindrical format with 30Ah capacity.
- Ampace said E30P can charge to 95 percent in 47 minutes under daily fast-charging conditions.
Ampace launches JP30 cylindrical lithium battery globally
- Ampace announced the JP30 launch on December 12, 2024.
- The 18650-format cell supports 36A continuous discharge and 140A pulse discharge within five seconds.
- Ampace positioned JP30 for power tools and other compact high-power use cases.
Ampace debuts Kun-Era electric motorcycle battery series at EICMA
- The Kun-Era series was presented as a full-scenario power solution for electric motorcycles.
- Ampace said the lineup supported 51V, 60V, and 74V platforms in 2kWh, 3kWh, and 4kWh versions.
- The product line was aimed at scooters, motorcycles, maxi-scooters, and three-wheelers.
Epsilor unveils high-voltage military battery system based on NATO 6T batteries
- The COMBATT 6T lithium-ion battery system was announced with 175Ah and 4,400Wh energy capacity.
- Epsilor said the batteries were undergoing U.S. Army MIL-PRF-32565C standardization tests.
- The product targets military vehicle power needs rather than generic commercial battery supply.
Delta-Q releases RQ700 battery charger
- The RQ700 expanded Delta-Q's RQ Series with 24, 36 and 48 VDC configurations.
- The charger targets light electric vehicles, outdoor power equipment and industrial pallet trucks.
- Delta-Q made the IP67-rated charger available for sampling with an auxiliary supply for battery-management and telematics components.
Inspired Energy launches high-power robotics battery
- The seven-cell pack provides 25 V and 73 Wh of stored energy.
- It supports 20 A continuous discharge and 30 A peak current for motor inrush loads.
- Inspired Energy developed the pack in response to customer demand for higher-power motor applications.