Customer site - 2026-08-18 - RentoRobot deployed more than six rented FANUC palletizing systems across Pearl Crop, using CRX robots in constrained lines and industrial robots for higher-volume 50-lb cases. - More than six FANUC palletizing systems - source: fanucamerica.com
Customer site - 2026-08-12 - DEVELOP built a compact FANUC LR Mate 200iD and M-710iC/45M packaging/palletizing cell for Inland Packaging; after six months it reduced staffing from two operators to one per line and beat its 4.5-second cycle target at 4.2 seconds. - FANUC… - source: fanucamerica.com
Customer site - 2026-07-16 - RTSS integrated two FANUC LR Mate 200iD/7L robots into Thogus' helmet-drilling cell, increasing output about 25%. - Two FANUC LR Mate 200iD/7L robots - source: fanucamerica.com
Customer site - 2026-06-23 - Complete Solution Robotics integrated a FANUC M-710iC/45M into a two-station sanding cell operating at RC Industries, cutting sanding time by up to 50% and raising capacity about 33%. - FANUC M-710iC/45M sanding cell - source: fanucamerica.com
Customer site - 2026-05-19 - I2T integrated two FANUC SR-6iA SCARA robots into BelleFlex's automated disc-spring inspection cell; BelleFlex subsequently ordered two additional identical systems. - FANUC SR-6iA inspection systems - source: fanucamerica.com
Customer site - 2026-05-11 - Delkor installed a FANUC M-10iA, M-2iA and M-410iB/700 packaging and palletizing line at Mrs. Gerry's, reaching full capacity within ten days. - Delkor/FANUC packaging and palletizing line - source: fanucamerica.com
Customer site - 2026-04-21 - ARC Engineering deployed a FANUC CRX-30iA repackaging cell at RMR Solutions, increasing daily throughput from about 2,500 to 3,700 cases. - FANUC CRX-30iA repackaging cell - source: fanucamerica.com
Customer site - 2026-04-15 - The Way Automation deployed a FANUC R-2000 brake-press-tending cell at Thunder Creek and was installing a second FANUC-powered system by publication. - FANUC R-2000 brake-press-tending cell - source: fanucamerica.com
Customer site - 2026-03-03 - Premier Automation and PushCorp integrated a FANUC M-710iC/45M and PushCorp SBS82 into Gupta Permold's autonomous beam-sanding cell, increasing productivity at least 60%. - FANUC M-710 / PushCorp sanding cell - source: fanucamerica.com
Customer site - 2026-02-17 - Sydor Optics purchased an OptiPro Revel system using a FANUC CRX-10iA/L for unattended optic beveling, increasing daily output about 40%. - OptiPro Revel / FANUC CRX-10iA/L - source: fanucamerica.com
Customer site - 2026-01-20 - Automation Within Reach installed and commissioned RC-2 machine-tending cells using FANUC M-20-series robots at Northern Kentucky Machine for longer unattended production runs. - RC-2 / FANUC M-20-series cells - source: fanucamerica.com
Customer site - 2025-11-14 - Better Built Machines supplied three FANUC-controlled Paladin slab-cutting machines to Southern Stone Surfaces, replacing four legacy routers while increasing production 33% and reducing costs 15%. - Three FANUC-controlled Paladin cutters - source: fanucamerica.com
Customer site - 2025-07-16 - APT Manufacturing and FlexPAC deployed a FANUC R-2000iC/125L, 3DV Vision and AI Box Locator mixed-case depalletizing system at Lakeside Book, processing more than nine cases per minute and eliminating manual handling of more than 45 million… - source: fanucamerica.com
Customer site - 2025-04-23 - Acme Manufacturing deployed a two-FANUC-M-10 robotic padlock-polishing system at Wilson Bohannan, increasing output from 1,500–1,800 to more than 5,000 locks per eight-hour shift. - Two-FANUC-M-10 polishing system - source: fanucamerica.com
Customer site - 2025-03-21 - Serra Laser integrated a FANUC CRX with IPG LightWELD for Great Lakes Stainless, reducing an escalator-part welding process from about three hours to 15 minutes. - FANUC CRX / IPG LightWELD cell - source: fanucamerica.com
Customer site - 2025-02-19 - Delkor Systems installed multiple FANUC M-10-series automated packaging lines at Kenny's Candy, reaching 60–70 packages per minute. - Delkor/FANUC M-10 packaging lines - source: fanucamerica.com
Customer site - 2025-01-21 - Innovair Automation deployed FANUC M-710-series signature-handling robots at Friesens and was then engaged to develop similar collaborative systems for roughly twelve more floor areas. - FANUC M-710 signature-handling cell - source: fanucamerica.com
Customer site - 2025-01-15 - 3M and Inovision jointly developed and deployed a FANUC-based robotic paint-inspection and repair system on a moving General Motors top-coat line. - 3M/Inovision/FANUC paint-repair system - Moving top-coat line - source: fanucamerica.com