FANUC

• CR-35iB
• CRX collaborative robot series
• CRX-10iA/L
• CRX-20iA/L
• CRX-25iA

  CRX

• CRX-30iA
• CRX-30iA Food Grade
• CRX-3iA

  CRX

• CRX-5iA
• DR/8-16B Stainless
• FANUC M-2000iA/1200

  M-2000iA

• FANUC M-20iD/12L

  M-20iD

• FANUC M-810/190-20B

  M-810

• LR Mate 200iD/7L
• LR-10iA/10
• M-1000iA

  M-1000iA

• M-10iD/12
• M-20iD/25
• M-20iD/35
• M-410iC/500
• M-710iC/50
• M-710iD/50M
• M-810
• M-900iB/280
• M-950iA/500
• P-55/15-21A
• R-2000iC/165F
• SR-6iA
• SR-9iA/R

• Facility Event

  1 source-backed facility/manufacturing event - 2022-07-29 - Fanuc America to Expand Michigan Campus with New Facility - source posture: Company Disclosed

  Source
• Campus Expansion Investment Usd

  $90 million West Campus investment - 2022-07-29 - FANUC America West Campus - industrial robot campus expansion - FANUC America expanded its Michigan campus with a $90 million West Campus investment. - source posture: Third Party Reported

  Source

• Confirmed Operating Programme

  More than six FANUC palletizing systems at Pearl Crop - 2026-08-18 - Pearl Crop - named robotics deployment or operating programme - RentoRobot deployed more than six rented FANUC palletizing systems across Pearl Crop, using CRX robots in constrained lines and industrial robots for higher-volume 50-lb cases. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC packaging and palletizing cell at Inland Packaging - 2026-08-12 - Inland Packaging - named robotics deployment or operating programme - DEVELOP built a compact FANUC LR Mate 200iD and M-710iC/45M packaging/palletizing cell for Inland Packaging; after six months it reduced staffing from two operators to one per line and beat its 4.5-second cycle target at 4.2 seconds. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  Two FANUC LR Mate 200iD/7L robots at Thogus - 2026-07-16 - Thogus - named robotics deployment or operating programme - RTSS integrated two FANUC LR Mate 200iD/7L robots into Thogus' helmet-drilling cell, increasing output about 25%. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC M-710iC/45M sanding cell at RC Industries - 2026-06-23 - RC Industries - named robotics deployment or operating programme - Complete Solution Robotics integrated a FANUC M-710iC/45M into a two-station sanding cell operating at RC Industries, cutting sanding time by up to 50% and raising capacity about 33%. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC SR-6iA inspection systems at BelleFlex - 2026-05-19 - BelleFlex - named robotics deployment or operating programme - I2T integrated two FANUC SR-6iA SCARA robots into BelleFlex's automated disc-spring inspection cell; BelleFlex subsequently ordered two additional identical systems. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  Delkor/FANUC packaging and palletizing line at Mrs. Gerry’s - 2026-05-11 - Mrs. Gerry’s - named robotics deployment or operating programme - Delkor installed a FANUC M-10iA, M-2iA and M-410iB/700 packaging and palletizing line at Mrs. Gerry's, reaching full capacity within ten days. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC CRX-30iA repackaging cell at RMR Solutions - 2026-04-21 - RMR Solutions - named robotics deployment or operating programme - ARC Engineering deployed a FANUC CRX-30iA repackaging cell at RMR Solutions, increasing daily throughput from about 2,500 to 3,700 cases. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC R-2000 brake-press-tending cell at Thunder Creek - 2026-04-15 - Thunder Creek - named robotics deployment or operating programme - The Way Automation deployed a FANUC R-2000 brake-press-tending cell at Thunder Creek and was installing a second FANUC-powered system by publication. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC M-710 / PushCorp sanding cell at Gupta Permold - 2026-03-03 - Gupta Permold - named robotics deployment or operating programme - Premier Automation and PushCorp integrated a FANUC M-710iC/45M and PushCorp SBS82 into Gupta Permold's autonomous beam-sanding cell, increasing productivity at least 60%. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  OptiPro Revel / FANUC CRX-10iA/L at Sydor Optics - 2026-02-17 - Sydor Optics - named robotics deployment or operating programme - Sydor Optics purchased an OptiPro Revel system using a FANUC CRX-10iA/L for unattended optic beveling, increasing daily output about 40%. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC P-50iB/10L paint robots at Regal Finishing - 2026-01-22 - Regal Finishing - named robotics deployment or operating programme - RTSS integrated FANUC P-50iB/10L paint robots into Regal Finishing's four-stage conveyor line, raising overall daily throughput about 125%. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  RC-2 / FANUC M-20-series cells at Northern Kentucky Machine - 2026-01-20 - Northern Kentucky Machine - named robotics deployment or operating programme - Automation Within Reach installed and commissioned RC-2 machine-tending cells using FANUC M-20-series robots at Northern Kentucky Machine for longer unattended production runs. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  Three FANUC-controlled Paladin cutters at Southern Stone Surfaces - 2025-11-14 - Southern Stone Surfaces - named robotics deployment or operating programme - Better Built Machines supplied three FANUC-controlled Paladin slab-cutting machines to Southern Stone Surfaces, replacing four legacy routers while increasing production 33% and reducing costs 15%. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC R-2000iC/125L depalletizing cell at Lakeside Book - 2025-07-16 - Lakeside Book - named robotics deployment or operating programme - APT Manufacturing and FlexPAC deployed a FANUC R-2000iC/125L, 3DV Vision and AI Box Locator mixed-case depalletizing system at Lakeside Book, processing more than nine cases per minute and eliminating manual handling of more than 45 million pounds annually. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  Two-FANUC-M-10 polishing system at Wilson Bohannan - 2025-04-23 - Wilson Bohannan - named robotics deployment or operating programme - Acme Manufacturing deployed a two-FANUC-M-10 robotic padlock-polishing system at Wilson Bohannan, increasing output from 1,500–1,800 to more than 5,000 locks per eight-hour shift. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC CRX / IPG LightWELD cell at Great Lakes Stainless - 2025-03-21 - Great Lakes Stainless - named robotics deployment or operating programme - Serra Laser integrated a FANUC CRX with IPG LightWELD for Great Lakes Stainless, reducing an escalator-part welding process from about three hours to 15 minutes. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  Delkor/FANUC M-10 packaging lines at Kenny’s Candy - 2025-02-19 - Kenny’s Candy - named robotics deployment or operating programme - Delkor Systems installed multiple FANUC M-10-series automated packaging lines at Kenny's Candy, reaching 60–70 packages per minute. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  FANUC M-710 signature-handling cell at Friesens - 2025-01-21 - Friesens - named robotics deployment or operating programme - Innovair Automation deployed FANUC M-710-series signature-handling robots at Friesens and was then engaged to develop similar collaborative systems for roughly twelve more floor areas. - source posture: Company Disclosed

  Source
• Confirmed Operating Programme

  3M/Inovision/FANUC paint-repair system at General Motors - 2025-01-15 - General Motors - named robotics deployment or operating programme - 3M and Inovision jointly developed and deployed a FANUC-based robotic paint-inspection and repair system on a moving General Motors top-coat line. - source posture: Company Disclosed

  Source

Exact-product configurations are shown without inferring supply, purchase, customer status, standard fit, deployment or partnership.

• CRX-10iA/L with G4T4

  Physical Demo - Mounted - GER4TECH G4T4 used a mounted FANUC CRX-10iA/L arm to exchange HSK-mounted workpieces during an Intertool demonstration in Wels.

  Source

Supply chain relationships

• Nabtesco

  Inbound - robotic motion components - Nabtesco supplies precision reduction gears for FANUC industrial robot joints

  Source
• ATI Industrial Automation

  Inbound - Perception - FANUC integrates ATI fanuc ready axia force torque sensor kits

  Source
• ACCRETECH

  Inbound - Manufacturing - ACCRETECH supplied 49 coordinate-measuring machines used in FANUC production quality assurance

  Source
• SMC Corporation

  Inbound - End Effectors - SMC Corporation supplies CRX collaborative robot grippers to Fanuc Corp for Fanuc CRX cobot series applications

  Source
• Palladyne AI Corp.

  Inbound - Software - Palladyne AI Corp. supplies Palladyne IQ software integration for FANUC industrial robots

  Source
• Hirebotics

  Outbound - Robot Platform - Hirebotics Cobot Painter incorporates a FANUC CRX-10iA/L Paint robot arm

  Source
• Mujin, Inc.

  Outbound - Motion - Mujin offers its MujinRobot Depalletizer in a configuration built around a FANUC six-axis industrial robot

  Source
• Southwestern PTS

  Outbound - actuation and motion control - Southwestern PTS incorporates FANUC CRX cobots into its automated rivnut-insertion and screwdriving cells

  Source
• sewts

  Outbound - Robotics Automation - sewts VELUM uses a pair of FANUC M-10iD/12 robots to feed laundry folding machines

  Source
• Four Growers

  Outbound - actuation and motion control - Four Growers GR-200 incorporates a FANUC LR Mate robot arm for tomato harvesting

  Source
• Smith & Nephew

  Outbound - Equipment - FANUC supplies industrial robots and automated machining systems for Smith+Nephew implant manufacturing

  Source
• Delta Technology

  Outbound - Complete Robot Platform - Delta Technology's delivered mixed-case palletizing cell uses a FANUC M-710iC/45M robot

  Source

• 6954.T - TSE

• Kenji Yamaguchi - President and CEO - Yamaguchi leads FANUC, a core industrial robotics OEM.
• Ryuji Sasuga - Executive Managing Officer; CFO - Sasuga is finance leadership for FANUC.

Official corporate reporting and product-reference material for FANUC. Routine news and generic press coverage are excluded.

• FANUC Integrated Report 2025

  PDF · FY 2025 · FANUC Corporation

  Source
• FANUC robot general catalog

  PDF · Robot portfolio · FANUC Corporation

  Source

Events

• 2026-09-30 - Partnership - FANUC and Hitachi partner to commercialise Physical AI for factories

  Initial validation in Ibaraki factories covers varied-part picking and production changeovers. The partners will assess recognition, robot motion, takt time and quality, including use of Hitachi’s edge AI semiconductor. The work combines Hitachi’s HMAX Industry AI with FANUC’s industrial robots and control technologies.

  Source
• 2026-09-11 - Product Launch - FANUC announces AI Welding Agent developed with Google Cloud

  The system is independent of the welding power source and can work with any compatible power supply connected to a FANUC robot. Customers can subscribe through existing FANUC contracts without necessarily arranging a separate Google Cloud enterprise agreement. FANUC plans a live demonstration from September 16 and intends to begin shipments by the end of December 2026.

  Source
• 2026-09-08 - Partnership - Palladyne AI and FANUC collaborate on adaptive industrial robotics

  The work covers AI-driven motion planning, adaptive behavior, teleoperation and human-assisted learning. The partners will use simulation and model training before jointly validating customer use cases. No financial terms, launch customer or completed commercial deployment was disclosed.

  Source
• 2026-08-18 - Deployment - RentoRobot deployed more than six rented FANUC palletizing systems across Pearl Crop, using CRX…

  Pearl Crop uses more than six palletising systems supplied under RentoRobot's rental model. CRX cobots serve constrained lines while industrial robots handle higher-volume 50-pound cases.

  Source
• 2026-08-12 - Deployment - DEVELOP built a compact FANUC LR Mate 200iD and M-710iC/45M packaging/palletizing cell for…

  DEVELOP built a compact FANUC LR Mate 200iD and M-710iC/45M packaging/palletizing cell for Inland Packaging; after six months it reduced staffing from two operators to one per line and beat its 4.5-second cycle target at 4.2 seconds. The operating scope and metrics apply to the named installation or programme rather than every product, site or customer.

  Source
• 2026-07-31 - Market Signal - FANUC Q1 robot sales rise 18.7% as orders reach JPY 97.9bn

  Robot sales increased in the Americas and China, offsetting sluggish automobile-related demand in Japan. The Americas recorded brisk sales to automotive and general industries, while Chinese demand was firm across EV-related and general industries. Group net sales increased 17.7% to JPY 231.0 billion and FANUC raised its full-year consolidated forecast.

  Source
• 2026-07-16 - Deployment - RTSS integrated two FANUC LR Mate 200iD/7L robots into Thogus' helmet-drilling cell, increasing…

  Two FANUC LR Mate 200iD/7L robots operate in the Thogus helmet-drilling cell. The installation increased output by about 25%.

  Source
• 2026-07-16 - Partnership - Fujitsu begins physical-AI business study with FANUC, Yaskawa and Kawasaki

  Fujitsu will lead the business study and contribute AI, world-model, simulation and systems-integration capabilities. The robot manufacturers bring industrial platforms, control systems and deployment experience. The initiative builds on Fujitsu and NVIDIA collaboration and is intended to move physical AI toward commercial implementation in Japan.

  Source
• 2026-06-23 - Deployment - Complete Solution Robotics integrated a FANUC M-710iC/45M into a two-station sanding cell…

  The two-station RC Industries cell uses a FANUC M-710iC/45M. Sanding time fell by up to 50% and capacity increased about 33%.

  Source
• 2026-06-22 - Partnership - Vention and FANUC integrate robots with MachineMotion AI

  The combined platform supports FANUC CRX, LR Mate, LR-10iA, M-710iD and M-20iD robot families. Manufacturers can design, simulate, program, deploy and operate FANUC applications through Vention’s unified environment. The companies demonstrated FANUC CRX10iA and LR Mate robots using Vention software at Automate 2026.

  Source
• 2026-05-19 - Deployment - I2T integrated two FANUC SR-6iA SCARA robots into BelleFlex's automated disc-spring inspection…

  The BelleFlex inspection cell uses two FANUC SR-6iA SCARA robots. BelleFlex subsequently ordered two additional identical systems.

  Source
• 2026-05-18 - Product Launch - FANUC launches DR/8-16B Stainless food-handling robot

  The robot combines an 8 kg payload with a 1,600 mm operating range. An IP69K stainless exterior supports high-pressure cleaning with acidic and alkaline agents. Battery-free pulse coders and simplified wiring reduce scheduled maintenance work.

  Source
• 2026-05-15 - Partnership - FANUC strengthens NVIDIA integration for robot simulation and digital twins

  FANUC strengthened integration between NVIDIA Isaac Sim and FANUC ROBOGUIDE so robot motion simulations can be reproduced in Isaac Sim with accurate trajectories and cycle times. The collaboration includes NVIDIA PhysX for bin-picking simulation and NVIDIA Isaac Lab for robot training in virtual environments. FANUC also showed a robot demo using NVIDIA Isaac GR00T N for imitation learning and a robot AI system powered by NVIDIA Jetson Thor.

  Source
• 2026-05-13 - Partnership - FANUC and Google collaborate on Physical AI robot systems

  FANUC announced a strategic collaboration with Google to enhance its Physical AI Robot System. The company said the system uses Google Cloud technologies including Gemini Enterprise and supports Intrinsic Flowstate integration. FANUC said it had already shipped more than 1,000 robots for Physical AI related applications since its iREX reveal.

  Source
• 2026-05-11 - Deployment - Delkor installed a FANUC M-10iA, M-2iA and M-410iB/700 packaging and palletizing line at Mrs.…

  The Mrs. Gerry's line combines FANUC M-10iA, M-2iA and M-410iB/700 robots for packaging and palletising. The installation reached full capacity within ten days.

  Source
• 2026-05-06 - Demonstration - Matrix Design demonstrates FANUC CRX machine-tending cell at Automate 2026

  Matrix Design announced live Automate 2026 demonstrations for a standard FANUC CRX collaborative robot machine-tending platform. The demo cell combined machine tending, parts washing and drying, and a Keyence TM-X5065 telecentric measurement system for inline inspection. The company positioned the compact cell for manufacturers automating repetitive, precision-critical production tasks.

  Source
• 2026-04-21 - Deployment - ARC Engineering deployed a FANUC CRX-30iA repackaging cell at RMR Solutions, increasing daily…

  The RMR Solutions repackaging cell uses a FANUC CRX-30iA. Daily throughput increased from about 2,500 to 3,700 cases.

  Source
• 2026-04-15 - Deployment - The Way Automation deployed a FANUC R-2000 brake-press-tending cell at Thunder Creek and was…

  A FANUC R-2000 tends the brake press at Thunder Creek. The Way Automation was installing a second FANUC-powered system when the case was published.

  Source
• 2026-04-13 - Demonstration - FANUC, Schmalz and Orbbec cell joins Pelican at MODEX 2026

  The system identified, dimensioned and tracked cases of different sizes and configurations in real time. Its planning software generated stable pallet patterns intended to maximize density while preserving load integrity. The demonstration integrated FANUC robotic automation, Schmalz vacuum gripping and Orbbec 3D vision.

  Source
• 2026-03-03 - Deployment - Premier Automation and PushCorp integrated a FANUC M-710iC/45M and PushCorp SBS82 into Gupta…

  The Gupta Permold sanding cell combines a FANUC M-710iC/45M with a PushCorp SBS82. Productivity increased by at least 60%.

  Source
• 2026-02-23 - Demonstration - FANUC showcases Southwestern PTS automated rivnut installation cell

  The CRX-10iA/L cell automates multiple rivnut installations per part, reducing repetitive manual work. A smart installation tool verifies pull force and correct seating for every inserted rivnut. Operators select SKUs and manage production flow through the HMI while the cobot installs fasteners.

  Source
• 2026-02-17 - Deployment - Sydor Optics purchased an OptiPro Revel system using a FANUC CRX-10iA/L for unattended optic…

  The OptiPro Revel system uses a FANUC CRX-10iA/L for unattended optic bevelling at Sydor Optics. Daily output increased by about 40%.

  Source
• 2026-01-22 - Deployment - RTSS integrated FANUC P-50iB/10L paint robots into Regal Finishing's four-stage conveyor line…

  FANUC P-50iB/10L paint robots operate on Regal Finishing's four-stage conveyor line. Overall daily throughput increased by about 125%.

  Source
• 2026-01-20 - Deployment - Automation Within Reach installed and commissioned RC-2 machine-tending cells using FANUC…

  The RC-2 cells use FANUC M-20-series robots at Northern Kentucky Machine. Installation and commissioning enabled longer unattended production runs.

  Source
• 2026-01-13 - Deployment - Delta Technology deploys mixed-case palletizing cell with Jacobi Robotics and FANUC

  A defense manufacturer partnered with Delta Technology to deploy a robotic mixed-case palletizing cell. The cell uses Jacobi Robotics OmniPalletizer and a FANUC M-710iC/45M industrial robot. The case study describes the deployment as a live production operation commissioned in Q4 2025.

  Source
• 2025-12-23 - Partnership - Fanuc partners with Nvidia to advance physical AI in industrial robotics

  • Fanuc partnered with Nvidia to integrate Nvidia's AI computing and simulation platforms into Fanuc's industrial robot portfolio. • The collaboration focuses on on-robot and edge inference using Nvidia hardware platforms like Jetson, and photorealistic, physics-aware simulation using Nvidia Isaac Sim. • Fanuc also released support for the open-source robotics platform ROS 2, allowing programming via Python.

  Source
• 2025-11-14 - Deployment - Better Built Machines supplied three FANUC-controlled Paladin slab-cutting machines to Southern…

  Better Built Machines supplied three FANUC-controlled Paladin slab-cutting machines to Southern Stone Surfaces, replacing four legacy routers while increasing production 33% and reducing costs 15%. The operating scope and metrics apply to the named installation or programme rather than every product, site or customer.

  Source
• 2025-07-16 - Deployment - APT Manufacturing and FlexPAC deployed a FANUC R-2000iC/125L, 3DV Vision and AI Box Locator…

  APT Manufacturing and FlexPAC deployed a FANUC R-2000iC/125L, 3DV Vision and AI Box Locator mixed-case depalletizing system at Lakeside Book, processing more than nine cases per minute and eliminating manual handling of more than 45 million pounds annually. The operating scope and metrics apply to the named installation or programme rather than every product, site or customer.

  Source
• 2025-06-26 - Product Launch - FANUC releases ROBOGUIDE V10 robot simulation software

  ROBOGUIDE V10 launched as FANUC’s next-generation simulation software. Updates include VR support, redesigned interface and 64-bit performance. This is distinct from FANUC’s NVIDIA and Google Physical AI partnerships already in the DB.

  Source
• 2025-05-26 - Product Launch - HAHN introduces modular automation cell and Digital Solutions portfolio

  The modular standard cell combines an XPlanar transport system with digital twins, virtual commissioning and security-by-design features. The ISO 7-compatible MedTech Validation Cell simulates injection-moulding part removal and downstream processes for syringes, cartridges and autoinjectors. HAHN Digital Solutions introduced Analytics, Vision and Virtual tools for production data, no-code machine vision and virtual engineering.

  Source
• 2025-04-23 - Deployment - Acme Manufacturing deployed a two-FANUC-M-10 robotic padlock-polishing system at Wilson…

  Acme Manufacturing deployed a two-FANUC-M-10 robotic padlock-polishing system at Wilson Bohannan, increasing output from 1,500–1,800 to more than 5,000 locks per eight-hour shift. The operating scope and metrics apply to the named installation or programme rather than every product, site or customer.

  Source
• 2025-03-21 - Deployment - Serra Laser integrated a FANUC CRX with IPG LightWELD for Great Lakes Stainless, reducing an…

  The cell combines a FANUC CRX with IPG LightWELD at Great Lakes Stainless. Cycle time for the escalator-part welding process fell from about three hours to 15 minutes.

  Source
• 2025-03-17 - Demonstration - Pelican runs closed-loop mixed-case palletizing at ProMat 2025

  The system used 3D vision to identify the size and shape of randomly presented cases. Its planning engine selected cases and positions to build an optimized mixed-SKU pallet for retail delivery routes. A conveyor buffer reloaded cases when needed so the demonstration could run as a closed material-handling loop.

  Source
• 2025-02-19 - Deployment - Delkor Systems installed multiple FANUC M-10-series automated packaging lines at Kenny's Candy…

  Kenny's Candy operates multiple FANUC M-10-series automated packaging lines from Delkor. The lines reach 60–70 packages per minute.

  Source
• 2025-01-21 - Deployment - Innovair Automation deployed FANUC M-710-series signature-handling robots at Friesens and was…

  FANUC M-710-series robots handle signatures in the deployed Friesens system. Friesens subsequently engaged Innovair to develop similar collaborative systems for roughly twelve additional floor areas.

  Source
• 2025-01-15 - Deployment - 3M and Inovision jointly developed and deployed a FANUC-based robotic paint-inspection and…

  The FANUC-based system performs paint inspection and repair on a moving General Motors top-coat line. 3M and Inovision jointly developed the operating cell.

  Source
• 2024-06-19 - Demonstration - Pelican Pick combines automatic tool changes with barcode verification

  The system selected a gripper tool appropriate to the size of the part being picked from the bin. After the pick, the workflow exposed and scanned the barcode to verify that the robot had selected the correct item. The demonstration combined Pelican software with technology from FANUC, Keyence and Schmalz.

  Source
• 2024-05-06 - Product Launch - FANUC launches CRX-10iA/L Paint ex-proof collaborative robot

  FANUC's CRX-10iA/L Paint has a 10 kg payload and 1,418 mm reach, ideal for complex painting tasks. The robot complies with global explosion-proof safety standards, including IECEx and ATEX certifications. FANUC is a major Japanese industrial robotics and factory automation company with a broad robot portfolio spanning collaborative arms, heavy-payload industrial robots, CNC systems, and factory automation equipment.

  Source
• 2023-12-04 - Product Launch - FANUC introduces M-710iD/50M handling robot

  The six-axis robot combined a 50 kg payload with 2,606 mm reach for material handling, machine tending and palletising cells. A curved J2 arm and slim wrist reduced interference around large parts and fixtures while increasing access into work areas. FANUC described the iD generation as the first major redesign of the M-710 series in seventeen years.

  Source
• 2023-07-24 - Partnership - FANUC and Volvo Cars sign global industrial robot supply contract

  FANUC to supply over 700 robots to Volvo's new EV plant in Kosice, Slovakia, set to begin production in 2026. Contract includes robot deployment at Volvo sites in Ghent, Belgium, and Daqing, China, focusing on sustainable manufacturing.

  Source
• 2023-03-01 - Demonstration - Cretec, FANUC and Teledyne demonstrate automated doughnut production

  Cretec provided project management and programming around FANUC robotic automation. A Teledyne DALSA Z-TRAK2 3D sensor scanned up to 45,000 profiles per second for deformation and missing-part detection. A Genie Nano 5GigE camera classified colour and verified shape, returning rejects earlier in the process to reduce waste.

  Source
• 2023-01-16 - Deployment - Drim Robotics deploys FANUC M-10iD cell at ZF Gliwice

  A FANUC M-10iD robot tended assembly machines and leak-testing equipment for brake servos. The application required Drim to meet a demanding production-cycle target at ZF Gliwice. Drim documented the completed cell as an operational industrial-robot integration for the factory.

  Source
• 2022-11-04 - Demonstration - GER4TECH demonstrates G4T4 mobile machine tending

  The demonstrated configuration mounted a FANUC CRX-10iA/L arm on the mobile platform. Camera-based positioning calibrated the robot to the machine; Euroboxes carried HSK-mounted workpieces.

  Source
• 2022-07-29 - Facility - Fanuc America to Expand Michigan Campus with New Facility

  • Fanuc America announced the construction of a 655,000-square-foot facility in Oakland County, Michigan. • The company purchased 67 acres of land, including the former Thomas M. • Cooley Law School Campus. • This addition will bring Fanuc America's total operational space in the area to nearly two million square feet.

  Source
• 2022-07-29 - Facility Opening - Fanuc America expands Michigan campus with $90M investment

  • Fanuc America invested $90 million in its West Campus in Oakland County, Michigan. • The company constructed a 655,000-square-foot facility for manufacturing, engineering, and R&D projects. • This development increased Fanuc America's operational space in the area to nearly 2 million square feet.

  Source
• 2022-03-01 - Product Launch - FANUC introduces CRX-25iA collaborative robot

  The CRX-25iA joined the CRX-5iA and CRX-20iA/L as new additions to the CRX collaborative robot range. FANUC specified a 25 kg payload and identified palletising, machine tending, inspection and welding among CRX applications. Production availability for the CRX-25iA was scheduled for June 2022.

  Source
• 2021-11-10 - Product Launch - FANUC introduces compact LR-10iA/10 robot

  The 46 kg mechanical unit carried 10 kg across a 1,101 mm reach and supported floor, angle or inverted installation. Its slim arm and compact footprint were designed for crowded cells and integration with autonomous mobile platforms. FANUC scheduled initial production shipments for January 2022 and specified IP67 protection for industrial environments.

  Source
• 2019-12-23 - Product Launch - FANUC launches CRX-10iA collaborative robot for fast industrial deployment

  The CRX-10iA robot features a 10 kg payload capacity and a 1,200 mm reach, enhancing collaborative applications. FANUC's CRX-10iA is designed for easy programming, allowing users to deploy it in less than 30 minutes.

  Source
• 2018-05-29 - Partnership - FANUC's new AI functions utilizing machine learning and deep learning

  FANUC's AI Feed Forward function improves machining quality by reducing vibrations, shipping since April 2018. AI Bin Picking application enhances picking success rates, automating setup with deep learning, also launched in April 2018.

  Source
• 2017-02-14 - Demonstration - Simplimatic demonstrates three-robot electronics assembly line at IPC APEX

  The live line ran at IPC APEX in San Diego from February 14 to 16, 2017. Two FANUC robots placed heat sinks and built a Raspberry Pi enclosure before a UR3 disassembled it for another cycle. The booth also demonstrated Cimtrak PCB handling, laser marking and board-traceability systems.

  Source
• 2015-11-09 - Product Launch - FANUC introduces M-900iB/280

  The exact model simulated flow-form screw joining on an automotive door assembly. FANUC specified a 280 kg payload and 2.65 m reach. The reinforced casting targeted pressure-intensive precision work and stable heavy-payload transfer.

  Source
• 2014-09-09 - Partnership - Simplimatic joins FANUC robotics distribution network

  The September 9, 2014 agreement expanded Simplimatic offerings to include FANUC industrial robots. Simplimatic combined its electronics and semiconductor integration experience with FANUC robotics expertise. The partners targeted modular material-handling and back-end assembly systems for manufacturers reshoring production.

  Source

Relationships

• Hitachi

  Technology Partner - FANUC and Hitachi will validate Physical AI in Hitachi factories, with customer commercialisation targeted from FY2027.

• Google Cloud

  AI Technology Collaborator - FANUC developed AI Welding Agent with Google Cloud technology to generate and execute robot welding programs from component drawings.

• Four Growers

  Robot Arm Partner - Four Growers GR-200 harvesting robots use FANUC industrial robot hardware in the Westburg Greenhouse deployment.

• HAHN Automation Group

  Medtech Validation Cell Demonstration Partner - HAHN Automation Group presented its MedTech Validation Cell at FANUC's automatica 2025 booth.

• Drim Robotics

  Robot Cell Integration - Drim Robotics deploys FANUC M-10iD cell at ZF Gliwice

• Basler

  Compatible Robotics Integration - Basler products support FANUC robot applications.

• SICK AG

  Robot Safety Integration - SICK offers Safe Robotics Area Protection variants for FANUC robots.

• Vention

  Automation Platform Integration - Vention integrated FANUC robots with its MachineMotion AI and MachineLogic automation ecosystem.

• Southwestern PTS

  Fanuc Robotic Systems - Southwestern PTS integrates FANUC collaborative robots into automated fastening cells.

• Güdel Group

  Robot Platform - Güdel CoboMover Floor supports FANUC CRX cobot models as a linear seventh axis.

• Motion Controls Robotics

  Integrates With - Motion Controls Robotics is a FANUC authorised servicing integrator, combining FANUC robots with tooling, controls and vision for customer systems.

• Schmalz

  Compatible Integration - Schmalz offers ready-to-connect handling sets for FANUC robots, including gripper, flange and connection cable.

• Robotiq

  Plugin Integration - Robotiq's official FANUC plugin documentation covers direct gripper integration with FANUC CRX robots.

• AIRGATE

  Fanuc Plugin Development And Product Integration - AIRGATE develops plugins that integrate third-party accessories and end effectors with FANUC cobots.

• SCHUNK

  Schunk Gripping Components, Adaptations And Plugins Compatibility - SCHUNK says it offers components, adaptations and plugins for FANUC robot applications.

• qbrobotics

  Qb Softhand Industry End Effector Compatibility - FANUC CRX materials list qbrobotics qb SoftHand Industry as an anthropomorphic soft-robotic hand end effector for CRX collaborative robots.

• Zivid

  3d Camera Compatibility - Zivid 2+ 3D cameras are used in a robot-guidance solution documented as compatible with FANUC robots.

• Micropsi Industries

  Current Parent - FANUC acquired Micropsi Industries after an established partnership and continues MIRAI within its industrial-robotics business.

• Palladyne AI Corp.

  Industrial Physical AI Integration Partner - Palladyne AI and FANUC America are integrating Palladyne IQ across FANUC industrial and collaborative robots.

• Fujitsu

  Physical AI Business Study Partner - Fujitsu is working with fanuc on physical-AI business studies and deployment pathways in Japan.

• Intrinsic

  Industrial Robotics Platform Partnership - Intrinsic and FANUC are partnering to bring high-performance FANUC robot support into the Intrinsic Platform and Flowstate.

• CRG Automation

  Partner - CRG Automation received FANUC America Outstanding Growth recognition at the 2026 ASI Conference.

• Pelican Robotics

  Robotic Automation Partner - Pelican used FANUC robotic automation across Pelican Pick and mixed-case palletizing demonstrations.

• Cretec Cybernetics

  Robotic Production Line Partner - Cretec integrated FANUC automation in the demonstrated doughnut production line.

• Michigan West Campus

  Campus Expansion Location - FANUC America expanded its Michigan campus with a $90 million West Campus investment.

• Simplimatic Automation

  Robotics Distribution And Integration Partner - The named robotics company is explicitly connected to Simplimatic in the dated source.

• Balluff

  Automation Training Collaborator - Balluff sensors, IO-Link and RFID infrastructure are integrated in FANUC training and automation cells.

• General Motors

  Historic Gmf Robotics Venture - FANUC entered the U.S. through the GMF Robotics joint venture with General Motors before taking full control as FANUC America.

Comparable profiles

• ABB

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• Universal Robots

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• KUKA

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• JAKA Robotics Co., Ltd.

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• ABB Robotics

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• Comau

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• Sichuan Tianlian Robotics Co., Ltd.

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• Flexiv Robotics Ltd.

  comparable profile - Collaborative Robot Arm Builder

• LE Robotics

  comparable profile - Industrial Robot Arm Builder

• Stäubli Robotics

  comparable profile - Industrial Robot Arm Builder

• Estun Automation

  comparable profile - Industrial Robot Arm Builder

• KAWADA Robotics Corporation

  comparable profile - Industrial Robot Arm Builder

Shared workflows

• VMECA

  workflow adjacency - Industrial Pick And Place

• RORZE Corporation

  workflow adjacency - Industrial Pick And Place

• Automation Technology

  workflow adjacency - Machine Tending

• Cobotracks

  workflow adjacency - Palletizing And Packaging · Welding And Fabrication

• Svaya Robotics

  workflow adjacency - Industrial Pick And Place

• Schweitzer Engineering Laboratories

  workflow adjacency - Industrial Pick And Place

• INACAP

  workflow adjacency - Industrial Pick And Place

• BMO Automation

  workflow adjacency - Machine Tending

• Daifuku Co., Ltd.

  workflow adjacency - Palletizing And Packaging

• JBT Marel Corporation

  workflow adjacency - Palletizing And Packaging

• Rocketfarm

  workflow adjacency - Palletizing And Packaging

• Pickit

  workflow adjacency - Palletizing And Packaging

Context tags

• Industrial motion control - Capability - Fanuc provides industrial motion control for robot arm positioning.
• Industrial robot arm builder - Peer Group - Fanuc builds industrial robot arms for manufacturing and production automation.
• Machine tending - Workflow - Fanuc robots tend CNC machines, presses and production equipment.
• Welding and fabrication - Workflow - Fanuc robots support welding, cutting and fabrication workflows.
• Palletizing and packaging - Workflow - Fanuc robots handle palletizing, depalletizing and packaging.
• Collaborative safety control - Capability - Fanuc collaborative robot lines support human-adjacent safety.
• Robot arm OEM - Stack Layer - Fanuc builds complete industrial robot arm systems.
• Collaborative robot arm builder - Peer Group - Fanuc offers collaborative robot arm products.
• Industrial pick and place - Workflow - Fanuc robots perform pick-and-place, handling and material transfer.
• Factory automation cells - Customer Environment - Fanuc robots are deployed in factory automation cells.