Verified Events
DateTypeCompanyHeadlineSegment
RAION Robotics and Korea Southern Power launch quadruped power-plant program
- The Sept. 7 kickoff was held at Korea Southern Power’s Samcheok Bitdream plant and publicly announced Sept. 8.
- The program covers development and field demonstration for safety inspection in hazardous plant environments.
- The report does not name an exact RAION product, so the event remains company-level rather than being forced onto RAIBO2.
Quadsat demonstrates airborne RF detection and geolocation at DALO Industry Days
- The live demonstration took place on August 20 during the August 19–20 event.
- SpectraLoc detected radar emissions from Karup Airport and converted the airborne measurements into electromagnetic intelligence.
- Quadsat presented SpectraLoc as a platform-agnostic payload that can integrate across unmanned aircraft selected for mission range, endurance and operating requirements.
Skygauge completes naval-vessel corrosion-repair trials
- Testing completed in May 2025 after validating bristle blasting, surface cleaning and roller-based coating application.
- The drone replicated the principal steps of manual spot-corrosion repair while personnel remained on the ground.
- A follow-on phase began to test repeatability against Royal Canadian Navy coating standards.
Sierra Base demonstrates SIRIUS UAV with Gremsy Pixy LR
- The mounted Pixy LR gimbal carried Sony LR1 imaging for detailed structural inspection.
- The configuration targeted bridge monitoring and mapping, including difficult access and weak-GPS environments.
- The companies planned subsequent operational deployment and expansion to Gremsy's VIO payload.
Bucket Robotics demonstrates CAD-driven defect inspection at CES 2026
- Bucket Robotics exhibited at CES 2026 in Las Vegas, using its first appearance at the show to demonstrate manufacturing inspection with real parts, cameras and production constraints.
- The platform converts CAD files and sample data into defect-detection models that run on existing cameras and edge hardware without a manual-labeling cold start.
- Bucket says the models can deploy in minutes, adapt as parts and production lines change, and support defect detection, classification and robotic-guidance workflows.
CAN-USA used Flyability Elios drones for offshore inspection work for Shell
- Shell and CAN-USA adopt the Elios 3 UT drone with Tether Power Units for their offshore inspections
- One of these technologies is the Elios 3 UT, a collision-tolerant drone equipped with a 4K camera, powerful LiDAR, LEL gas sensor, UTM payload, and tether power unit
- Most recently, Tori has been working on Olympus, a Shell-operated offshore platform positioned 130 miles south of New Orleans
Weld Inspector detects ISO-classified defects live at Essen
- Visitors saw the scanner identify and classify weld defects in real time.
- The demonstration applied inspection criteria aligned with ISO 5817, ISO 10042 and ISO 6520-1.
- IUNA shared its booth with AWL, combining AI inspection software with robotic-automation expertise.
Dataguess demonstrates Inspector Solo at Industry 4.0 summit
- Dataguess demonstrated Inspector Solo at Stand D5 during the three-day Gebze summit.
- The compact edge device combined defect detection, classification, counting and label verification.
- It ran real-time inspection offline and managed labelling, model training and deployment locally.
Smart Robots showcases guided assembly and poka-yoke technologies at MECSPE
- The company highlighted manual-workstation digitization, guided assembly and quality-control workflows.
- The event positioned Smart Robots around reducing production errors and non-quality costs.
- The capability strengthens The company's role in commercial automation and autonomous-system workflows.
RAIBO2 completes full marathon without recharging
- Raion Robotics records RAIBO2 as completing a full marathon without recharging in 4 hours, 19 minutes and 52 seconds.
- The demonstration is a hard field-mobility signal for long-duration quadruped operation rather than a short lab demo.
- Research data later reported the 42.195 km run used 1280 Wh from a 2016 Wh battery pack.
MAB Robotics demonstrates underwater locomotion with Honey Badger 4.0 quadruped
- MAB Robotics demonstrated Honey Badger 4.0 walking underwater as an extension of the quadruped's inspection capability in extreme environments.
- The company positioned the robot for underground infrastructure, waterlogged terrain, sewer, tunnel, and maintenance applications.
- The demonstration highlighted the platform's sealed actuator design, IP67-rated construction, and ability to transition between land and submerged operation.
Aerones completes offshore robotic wind turbine maintenance technology tests in Scotland
- Aerones completed offshore wind turbine maintenance technology tests at the ORE Catapult facility near Levenmouth, Scotland.
- The October 2024 testing was partially funded by the European Union's BLUE project.
- The tests validated the path toward robotic offshore turbine maintenance using Aerones' land-proven robotic systems.
ANYmal robot demonstrates autonomous inspection capabilities
- • ANYbotics showcased the ANYmal robot's autonomous inspection and locomotion capabilities at AWS re:Invent in Las Vegas.
- • The demonstration included the robot reading visual, thermal, and acoustic signals while avoiding obstacles.
- • The event highlighted ANYmal's ability to perform autonomous missions in complex environments.
SkyMul tests SkyTy rebar-tying drone at Curiosity Lab
- SkyTy targets faster, lower-labor rebar tying for concrete construction sites.
- The company used Curiosity Lab space to develop the drone system after receiving NSF Phase I grant support.
- The demonstration validates SkyMul tests SkyTy rebar-tying drone at Curiosity Lab's technology in unmanned aircraft, air mobility or counter-drone operations.
Innvotek demonstrates Amphibian at Global Offshore Wind 2021
- Innvotek presented Amphibian at RenewableUK Global Offshore Wind 2021, positioning it as a mobile robotic platform for advanced NDT inspection and maintenance of large offshore assets.
- The company said the robot was displayed at the stand of its longstanding partner Offshore Renewable Energy Catapult and drew interest from more than 20 businesses exploring industrial applications.
- The event positioned Amphibian around wind-turbine monopile inspection, corrosion mapping, biofouling cleaning, and remote access to offshore structures in harsh marine conditions.
BladeBUG completes first offshore turbine blade walk
- The six-legged robot repeatedly scaled blades over two days in mid-October.
- The demonstration used ORE Catapult?s 7MW Levenmouth offshore turbine.
- The robot walked 50 metres on a vertically positioned blade.