Verified Events
DateTypeCompanyHeadlineSegment
Elite Robots showcases Primo across cobot, mobile and humanoid systems at CIIF
- The CIIF showcase uses Primo across three robot forms rather than announcing its first release.
- Exhibits include optical-module handling, cable-tie threading, mixed-SKU packing and laboratory automation.
- The showcase spans optical-component manufacturing, electronics assembly and laboratory automation; customer sites and quantities are unspecified.
NeodraDynamics shows Neo1 with JD Industrial at CIIF
- The company describes 41 active degrees of freedom, with 39 joints using digital hydraulic actuators and two forearm rotational joints using electric drive.
- Neo1’s dual-arm payload is rated at 500 kg in the company announcement.
- The JD Industrial collaboration focuses on scenario matching and pilot applications through industrial supply-chain channels.
HPMicro and Amlogic demonstrate eight-axis EtherCAT joint control
- Amlogic A311Y3 runs the touchscreen interface and EtherCAT master; HPMicro HPM5E3Y handles joint-level motor control.
- The demonstration shows coordinated motion, speed and direction adjustments, and live joint-position feedback.
- The architecture separates upper-level processing from real-time field-oriented control at each joint.
MindOn reports 142 garments per hour in extended Mind-1 folding demo
- The upload lasts 59 minutes and 22 seconds, with a displayed folding counter reaching 142.
- A person supplies each new garment to a fixed dual-arm station with grippers.
- The footage is labelled normal-speed autonomous folding; garment selection and fold-quality criteria are not standardized.
Synthoid demonstrates SynRobot 03 industrial assembly at CIIF
- The screw-fastening sequence combines identification, force-guided alignment, clamping, tool use and quality checks.
- During PCB insertion, the robot withdraws and replans around contact or alignment errors before closing the enclosure with both arms.
- SynRobot 03 combines a mobile base, dual arms and interchangeable end tools; performance specifications remain company-reported.
Archon Robotics shares Whole-Body Intelligence debut demonstration
- S1 handles task understanding and multimodal inputs; S0 coordinates stabilization and whole-body movement.
- The company distinguishes autonomous full demonstrations from teleoperated S0 explanations and DAgger correction segments.
- Its training pipeline combines human demonstrations, real-robot post-training and corrective demonstrations.
DexRobot validates DexGEM autonomous manipulation policies
- The demonstrated tasks ran without teleoperation or real-robot training data.
- Validated workflows included bimanual object handovers and continuous-contact manipulation.
- Human motion capture and first-person video were reconstructed in simulation before policy transfer to real hardware.
AGILINK demonstrates OmniHand 3 Ultra silk handling and embroidery
- The hand separated silk threads, threaded a needle, stretched fabric on a hoop and stitched.
- Its direct-drive architecture has 21 active joints and tactile sensing at the fingertips, finger pads and palm.
- The demonstration validates delicate manipulation; the release does not establish autonomous commercial operation.
LumiBot showcases tactile sensing, dexterous hands and manipulation models at IROS
- Lumi-Tac V2 is rated at 10 µm spatial resolution, 0.02 N force detection and 120 frames per second.
- Lumi-Dex 11 demonstrated a stamp, tray and card manipulation sequence while adapting to human disturbances.
- The company described automotive, electronics and life-sciences proofs of concept, alongside its higher-DoF Lumi-Dex 21 hand.
Bethel debuts planetary, harmonic and cycloidal robot joint modules
- Planetary modules use dual absolute encoders and a hollow structure for compact robot joints.
- Harmonic modules target upper limbs, while cycloidal modules address higher loads in lower limbs and torsos.
Unitree G1 tested by Orboh for outdoor okra manipulation
- The June-to-September project was conducted in Kagoshima under wind, changing sunlight and foliage occlusion, with 70 days of system development.
- The stack used YOLO detection, ZED-M stereo point clouds, inverse kinematics and Diffusion Policy only for final alignment; indoor simulated-field grasp success was 16 of 20 attempts.
- The trial achieved detection and grasping, while cutting remained unfinished and force-control improvements were still needed.
Unitree R1 tested with Nossa360 at a construction site
- Nossa conducted the trial with Moriya Construction and yasstyle.
- R1 carried a 360° camera for live remote viewing and predefined-route image capture used to generate a Street View-style record.
Dongtu demonstrates domestic humanoid electronic architecture under fault and attack tests
- The demonstration compared platforms under single-point fault, bus attack and network attack conditions.
- The architecture combines Intewell, AUTBUS, MaVIEW and deterministic network and computing technologies.
Lingyu TA2 completes public autonomous cabinet-task sequence
- Xinshu Future supplied the embodied decision model, while Intel edge servers handled the on-site computing workload.
- The TA2 supplied perception, action execution, robot-level control and safety in the integrated demonstration.
- The TA2 developer edition exposes interfaces for partner model adaptation and on-robot validation.
TENNIIX unveils ULTRA MAX tennis robot with LimX
- The robot played against former world No. 12 Wang Qiang at the Billie Jean King Cup Finals.
- Its demonstrated shots included varied topspin, deep looping balls and directional placement.
- TENNIIX provides ball and player tracking while the LimX TRON 2 wheeled-leg platform supplies multidirectional movement and adjustable delivery height.
Genisom demonstrates multi-quadruped collaborative transport
- The robot team shares spatial information to localize itself and its peers, plan a route and adjust formation around people, low obstacles and stairs.
- The control stack combines online load-state estimation, joint multi-robot trajectory optimization and whole-body coordinated control.
- Genisom positions the system for heavy-load transport in disaster sites, hazardous-material or radiation zones, industrial plants and mountainous terrain.