Verified Events
DateTypeCompanyHeadlineSegment
AiMOGA schedules Mobo global showcase and pre-orders for October summit
- The 22-degree-of-freedom robot uses MoAgent for multimodal interaction, spatial perception and task planning.
- The summit programme also includes Mornine, Argos Pro, police and healthcare robot demonstrations.
- AiMOGA’s broader portfolio has more than 3,000 cumulative deliveries across more than 60 countries and regions; these figures are not Mobo-only deliveries.
PaXini ships robots for ReYuu and JD Japan logistics proof of concept
- The trial is planned at a JoyLogistics domestic logistics site in Japan.
- Testing covers object recognition, grasping, movement and sorting, with Big Hands providing technical support.
- ReYuu will evaluate paid robot-rental feasibility, pricing and maintenance support after the trial.
Agility Robotics selects Nyobolt as fast-charge battery provider
- The planned battery system offers 90 minutes of runtime and a nine-minute recharge, a 10:1 run-to-charge ratio compared with Digit 4’s 2:1 ratio.
- Early access to Digit 5 with Nyobolt technology is expected in the first half of 2027, with availability increasing over the following six to nine months.
- Nyobolt’s high-power battery design targets smaller, lighter packs and repeated charging in warehouse and manufacturing environments.
Leju and Zhaofeng report 15 humanoids in routine automotive-parts loading
- The loading configuration covers 15 workstations and more than 10 part types, including components with 80–120 mm inner diameters; reported loading success is 98%.
- A loading cycle takes under 40 seconds, compared with about 15 seconds for a worker at the same station.
- The operating history spans over two months without a fault, about 1,000 operating hours and more than 60,000 assisted components.
NEURA Robotics introduces multimodal Neuron AI foundation model
- Neuron AI aligns multisensory observations and memory in a shared stream that generates physical actions.
- Training combines real robot data, simulation-amplified data and sensor-suit human demonstrations across five NEURA embodiments.
- An eleven-minute 4NE1 laundry demonstration is planned for GTC Berlin on 20–22 October; the launch does not establish that future demonstration as completed.
NEXFORM completes tens-of-millions RMB seed financing
- Investors include Gobi Partners and Zhejiang University Youchuang, without assigned lead status.
- Hotel/property cooperation values are signed agreements, separate from financing, realised revenue or robot deliveries.
Panasonic’s Hakobo selected for Awaji guidance and security trial
- Hakobo’s trial is scheduled for weekdays from October 15–28, including multilingual assistance and nighttime security.
- The wider October 15–November 1 program also tests robot-mediated hospitality and remote wellness support.
- The work forms part of Japan’s SIP program on human-cooperative robotics.
Astribot raises RMB1B at RMB15B valuation
- TouKong Donghai led the round; Hongtai Fund, the Ninghai Xingtaihe Fund managed by Guanghua Sunshine, Shanheng Capital and returning investor Xianmu participated.
- The capital will support model iteration, hiring, commercialization and production-capacity development.
- June’s earlier B-series financing announcement disclosed more than RMB1 billion across multiple financings.
Robros gains sandbox approval for 20 humanoid trials across four industries
- Named trial hosts are Nepes, Sungwoo Hitech, HD Hyundai Samho and DeliveryLab.
- Tasks include semiconductor-part cleaning, car-body component placement, scaffolding-piece handling and refrigerated package loading.
- The exemption enables mobile humanoid work under supplemented safety conditions where rules had assumed fixed industrial robots.
Highlanders displays N at CEATEC 2026
- The October 13–14 display at Makuhari Messe includes hardware demonstrations and access to development engineers.
- Highlanders develops the mechanical design, electronics, embedded software and AI internally; stated payload is 8 kg per arm or 12 kg with both arms.
AgiBot reportedly nearing RMB1–1.5B financing
- The proposed valuation is denominated in renminbi, while earlier IPO discussions referred to a HKD40–50 billion target.
- Preparations for a Hong Kong listing began in July.
Agility Robotics S-4 declared effective; Churchill XI vote set for 2 November
- SEC effectiveness is a registration milestone; the business combination remains subject to shareholder approval and other closing conditions.
- Churchill XI’s extraordinary general meeting is scheduled for 2 November 2026.
- Agility expects to trade under AGLT following closing; more than $620 million in expected gross proceeds remains conditional.
AgiBot introduces WorldOracle benchmark for action-conditioned world models
- The 335-example evaluation spans AgiBot G2, YAM and human-hand embodiments with successful, failed and extended interactions.
- Seven world models are tested across rigid, deformable, fluid and articulated-object interactions.
- Metrics assess physical-state correctness, spatial alignment, interaction-area fidelity and coherence across synchronized views.
Synthoid demonstrates SynRobot 03 industrial assembly at CIIF
- The screw-fastening sequence combines identification, force-guided alignment, clamping, tool use and quality checks.
- During PCB insertion, the robot withdraws and replans around contact or alignment errors before closing the enclosure with both arms.
- SynRobot 03 combines a mobile base, dual arms and interchangeable end tools; performance specifications remain company-reported.
Lumos Robotics receives tens-of-millions-yuan strategic investment from Keli Sensing
- Keli force-sensing hardware and joint-torque sensors are planned for deeper integration with Lumos robot platforms.
- Lumos NexCore connects data collection, model training, skill evaluation and deployment across the company's embodied-robot systems.
- Lumos develops bipedal, wheeled-arm and wheel-legged platforms for industrial and commercial environments.
UBTECH and C&D plan humanoid robotics joint venture in Fujian
- The planned venture will operate a regional technology centre combining maintenance, training, application development, equipment rental and sales, and competitions.
- The partners intend to apply robots within C&D’s supply-chain and property businesses; the 10,000-unit figure is a shared sales goal through 2030.
AgiBot opens Hong Kong office at Times Square in Causeway Bay
- The first phase plans an international R&D headquarters, an industry-education innovation base and joint laboratories with local universities.
- A later phase would expand its research team and invest tens of millions of dollars in university laboratories and research collaboration.
- University recruitment sessions are scheduled for October 9 at CUHK and October 13 at HKUST and the University of Hong Kong.
RobotEra reports VPP2 leading the RoboDojo manipulation benchmark
- VPP2 ranked first in Generalization, Precision and Memory among the evaluated methods.
- The model combines video prediction with action generation, with code and a project page publicly available.
- Separate ALOHA evaluations achieved 58.5% average success across ten task categories; the reported LIBERO-Pro result was 45.0%.
iHub Robotics signs Kerala Police MoU for humanoid and tracked-robot trials
- Daksha uses the Viveka vision-language-action model for traffic observation, signal-violation detection and alerts to Cyberdome.
- Kavach is a tracked vehicle intended for difficult-terrain surveillance and supply transport; offensive equipment remains under operator control.
- Trials are planned in designated jurisdictions, with field integration targeted within six months before wider deployment.
UBTECH and FAW-Volkswagen expand humanoid cooperation into logistics
- The work extends a relationship that previously brought Walker S Lite into vehicle-quality inspection training at FAW-Volkswagen's Qingdao plant.
- UBTECH's industrial robot architecture combines embodied reasoning, motion control, robot hardware and multi-robot intelligence.
Booster Robotics appoints ELSA Japan distributor for K1 and T2
- K1 targets research and education, with four configurations offering different compute and battery options.
- T2 configurations include a Jetson Thor T5000 option and support up to 10 kg of combined dual-arm payload.
- ELSA plans to support embodied-AI development and validation alongside its GPU-server and workstation offerings.
DexForce coauthors UNITAS 3D-native world action model
- The paper reports 99.8% LIBERO, 89.1% LIBERO-Plus and 92.94% / 93.04% RoboTwin Clean / Randomized success.
- Its real-robot Table 2 reports 18/20 book-organizing and 16/20 ball-packing trials, averaging 85% over these two tasks.
- The public project includes interactive scene predictions; checkpoints, inference and training code remain planned releases.
Minerva Humanoids raises approximately $10M pre-seed for hazardous-work robots
- Long Journey Ventures and Credo Ventures co-led the round, alongside participants including MVP Ventures, Kaya, Compound and Hugging Face.
- Remote specialists use a VR headset for critical manipulation while Minerva Intelligence manages balance, fall recovery and navigation.
- Initial prototypes are manufactured and assembled in Germany, with software and AI primarily developed in the United States; paid pilots begin in fall 2026.
AeiROBOT selected for DAPA Defence Innovation programme
- Selected companies are eligible for up to KRW5 billion in development and commercialisation support.
- Support includes military pilots, procurement incentives and export assistance.
- AeiROBOT is targeting logistics, patrol and rugged operation with ALICE 5 and onboard vision AI.
Boston Dynamics appoints Rohit Prasad chief executive
- He spent 12 years at Amazon, most recently as senior vice president and head scientist for Alexa and artificial general intelligence.
- His Amazon work included Alexa and the Nova foundation-model family; earlier he spent nearly 14 years at Raytheon BBN Technologies.
- A proposed appointment to Boston Dynamics’ board remains subject to the relevant approval process.
Agility CEO Peggy Johnson joins MITRE-led Project Meridian study
- The Pentagon-commissioned study examines future defence capabilities and investment priorities over a 10–20-year horizon.
- Johnson’s contribution focuses on lessons from commercial humanoid deployments, including logistics and operational support.
Honda announces Avatar Robot demonstration for CEATEC 2026
- The exhibit was scheduled for October 13–16 at Makuhari Messe under Honda's Innovation Lab – Missing Piece booth concept.
- The planned demonstration pairs a multi-fingered robotic hand with AI motion assistance for a remote human operator.
- Honda identifies healthcare, facility maintenance, disaster response and space development as target applications for the technology.
RoboParty unveils RP1 bipedal humanoid at IROS
- In-house Romomo actuators deliver claimed peak joint torque of up to 160 N·m.
- PartyOS incorporates the UFO unsupervised reinforcement-learning framework for humanoid control.
- Visitors pushed and kicked the robot during a booth demonstration of posture adjustment and balance recovery.
PaXini reports PX6AX GEN3 tactile sensing results in CASIA precision-assembly research
- The research team was led by Long Cheng and Xinpan Meng at the Institute of Automation, Chinese Academy of Sciences.
- PaXini reports reductions of 60% in maximum interaction force and 44% in torque; the release does not identify the comparison baseline.
- The sensor supplied tactile data to the integrated assembly system. This is a research result, with no new product launch or commercial deployment established.
PrimeBOT begins Q1 and T1 customer handovers in three cities
- Shanghai buyers received delivery certificates at the Huaihai Middle Road store.
- Customers place orders in store; robots cannot yet be taken home immediately at the handover events.
- Both models start at RMB19,999, with Q1 Explorer at RMB26,999 and T1 Pro at RMB29,999.
Galbot confirms ET1 pricing across Standard, Pro and Flagship versions
- The three versions have different computing and development features.
- Pro and Flagship can be fitted with optional dexterous hands.
- Pricing and purchasing availability do not establish completed deliveries or deployment scale.
AgiBot introduces Vietnam RaaS and Yuan Sheng education programme with NIC
- Yuan Sheng covers curricula, joint laboratories, faculty training, student practice and research projects.
- Local partner ECOLIV supports market expansion, project delivery and after-sales capability building.
- The Hanoi conference drew more than 550 participants, including over 50 schools and more than 20 research institutions.
Honda and Redwire explore robotic manipulation for future commercial space stations
- The hand combines actively controlled joints with force and tactile sensing across fingertips and palm.
- The proposed workflow covers sample handling, materials transfer and laboratory-equipment operation.
- The companies plan discussions with station developers at the October 5–9 International Astronautical Congress in Antalya.
Agility and FORT Robotics sign MoU to expand Digit 5 safety partnership
- The architecture combines a safety pendant, on-robot communications and off-robot interfaces connecting Digit to external safety systems.
- FORT’s custom pendant sled integrates emergency-stop and enabling-device functionality for manual override during setup, maintenance and unexpected situations.
- The expanded framework covers joint hardware development, solutions engineering, regulatory compliance and deployment support as Digit 5 scales.
Boston Dynamics details Atlas GR3 hand and sim-to-real manipulation tests
- GR3 has 13 directly actuated degrees of freedom, compared with seven on the previous GR2 hand; its opposable thumb has four and each other finger has three.
- Dense pressure-sensitive tactile sensors cover the fingertips and palm, complementing actuator proprioception and backdrivable joints.
- Initial dynamic-task policies were trained with domain randomization and transferred to hardware using high-rate actuator proprioception for feedback.
Genisom AI debuts L1 Maker and presents MATRiX 2.0 at IROS
- L1 Maker has 12 degrees of freedom, an 8 kg maximum payload, up to 40-degree slope climbing and open sensor and compute interfaces.
- The quadruped supports hands-on assembly, system integration, calibration, motion control and algorithm development.
- MATRiX 2.0 supports simulated perception, navigation, locomotion and multi-robot collaboration before physical deployment.
Clone Robotics demonstrates Torso 3 hand teleoperation and outlines Torso 4 target
- The demonstrated hand was built in April 2026 and is the last legacy hand design.
- Six months of redesign focused on simulation compatibility and controllability.
- Torso 4 is intended for stationary bimanual enterprise tasks.
UBTECH factory tour outlines potential capacity of around 1,500 humanoids per month
- At maximum capacity, the line is designed to complete a humanoid every eight to ten minutes.
- The tour shows Cruzr Y1 material handling, Cruzr S2 sorting and assembly, and U7 Wally forklift transport.
- Siemens supports the digital-factory system.
AeiROBOT plans KRW40B humanoid factory in Ansan
- Construction is scheduled to start in November 2026, with completion targeted for October 2027.
- The three-storey site will combine research and mass-production functions.
- The agreement involves Ansan City, the Gyeonggi Free Economic Zone Authority and Hanyang University's ERICA campus.
AGIBOT reports over 8,600 H1 humanoid shipments in IDC market data
- IDC estimated global H1 humanoid shipments at nearly 25,000 units, up 432.1% year on year.
- The figures cover January through June shipments across AGIBOT’s humanoid portfolio.
Agility’s planned Churchill XI combination reaches first amended S-4 filing
- The filing carries registration number 333-298781 and remains preliminary and subject to completion.
- The proposed transaction follows the June 24 merger agreement and includes conditional PIPE commitments of $201.025 million.
Generative Bionics and Eni sign MoU to evaluate industrial humanoid applications
- Potential work includes industrial inspection, teleoperation and remote assistance in Eni operations.
- Versalis may collaborate on materials and components for sensorised robot shoes.
- Eni will evaluate industrial sites, battery handling and recycling, and high-performance computing support for Physical AI training.
AGIRobots begins sales of HA1 seven-axis arm for humanoid development
- Quasi-direct-drive actuation supports compliant motion, with detachable shoulder, upper-arm and forearm modules.
- At a 90-degree elbow posture, the published reference payload is 3 kg nominal and approximately 10 kg peak.
- Internal USB 2.0 wiring and end-effector power support connection of hands, cameras and sensors.
Panasonic Holdings begins humanoid development with 2029 manufacturing target
- Research has begun on the AI models that would control the robots.
- Sakakibara said the programme had no results ready for public disclosure, placing the work at an early development stage.
KNOWIN raises several hundred million yuan in Angel+++ round
- Zhengxingu Capital, Nanshan strategic investment and Walden participated in the round.
- Capital will support GLOW training data and generalisation, KNOWIN-X1 engineering validation, production preparation and specialist hiring.
- The Angel+++ announcement came 49 days after Knowin disclosed its RMB500 million Angel++ financing on 10 August 2026.
Unitree G1 tested by Orboh for outdoor okra manipulation
- The June-to-September project was conducted in Kagoshima under wind, changing sunlight and foliage occlusion, with 70 days of system development.
- The stack used YOLO detection, ZED-M stereo point clouds, inverse kinematics and Diffusion Policy only for final alignment; indoor simulated-field grasp success was 16 of 20 attempts.
- The trial achieved detection and grasping, while cutting remained unfinished and force-control improvements were still needed.
Unitree R1 tested with Nossa360 at a construction site
- Nossa conducted the trial with Moriya Construction and yasstyle.
- R1 carried a 360° camera for live remote viewing and predefined-route image capture used to generate a Street View-style record.
BE
BlueBug Embodied raises reported tens of millions of RMB in angel funding
- The company was founded in March 2025 by a team including Xi’an Jiaotong University researchers and robotics engineers.
- Its Mantis Standard modular humanoid is an embodied-AI development platform available since September 14.
Astribot brings T1 to North America with immediate US availability
- The company advertised immediate delivery and modular options for end effectors, computing modules and sensors.
- T1 stands approximately 1.55 m tall, weighs about 66 kg and provides 23 degrees of freedom excluding end effectors, with up to 5 kg payload per arm.
- Developer access includes joint and Cartesian control, whole-body coordination, sensor data and VR teleoperation alongside the Lumo AI stack.
AgiBot deploys 100 Lingxi X2 humanoids across ASD stores
- The robots handle reception, customer questions, product explanation and recommendation, navigation and handoff to human sales staff.
- A three-day operating test began across stores in Wenling, Shanghai and Wuxi with ten-hour daily schedules.
- The 100-unit, 100-site rollout represents a live multi-location retail deployment rather than a showroom demonstration.
AgiBot starts Chimelong operations and delivers 20,000th robot
- Robots are assigned to entertainment, science education, guest guidance, hotel reception and other park workflows.
- The launch included delivery to Chimelong of the 20,000th robot produced on AgiBot’s line.
- The deployment uses dedicated 5G-Advanced connectivity, centralised multi-robot coordination and safety systems.
O-ID raises pre-seed funding for modular factory humanoids
- Hustle Fund, Techstars and angel investors also participated in the round.
- The robot design uses replaceable joints, limbs and compute modules intended for on-site servicing.
- O-ID signed a letter of intent with Sumitomo Electric to discuss possible wire-harness technology use; it is not a supply order.
AgiBot parent establishes wholly owned Shenzhen Yueying subsidiary
- The entity has RMB4 million of registered capital and a scope covering robot R&D and sales, industrial robots and AI software.
- The subsidiary is wholly owned by Zhiyuan Innovation (Shanghai) Technology Co., Ltd., a company limited by shares.
Feather Robotics publicly launches Feather developer robot
- Feather combines a holonomic mobile base, two seven-degree-of-freedom arms, teleoperation and an open Python and ROS 2 software interface.
- Small quantities had already shipped to early users, with applications reported in restaurant and laboratory settings.
- The launch followed a previously announced $7.6 million pre-seed round led by Gradient Ventures; an exact round close date was not disclosed.
Feather Robotics discloses pre-seed financing
- Builder Capital, Geometry, SEED Innovations and Virgo VC also participated.
- SEED Innovations said its $1 million commitment, announced in May, converts at a qualifying round or liquidity event subject to a $60 million valuation cap.
- Feather said it had delivered its first customer order within nine months of founding and surpassed $1 million in revenue.
DexForce and Bosuda partner on embodied robots for new-energy manufacturing
- The programme will derive tasks from real production work, reconstruct them in simulation, train models and return robots to the factory for validation.
- Robot operating data is intended to feed back into the model-training cycle.
- DexForce separately reports robot work on feeding, package flipping, scanning and packing in SMT manufacturing environments.
Persona AI begins autonomous humanoid welding at customer sites
- The current work moves beyond Persona AI's earlier teleoperated welding demonstrations into autonomous welding by a complete robot system.
- The system learns site-specific welding methods from data including voltage, speed and torch movement patterns.
DexForce and Today International launch embodied-logistics solution partnership
- The joint solution connects picking, transport, palletising and machine tending with WMS, WCS, WES and fleet scheduling.
- Initial target industries include biopharma, new energy and retail.
- The roadmap begins with single-point picking and transport pilots before integration into production lines, AGV and AMR workflows and campus scheduling.
XPENG Robotics reportedly completes core supplier audits and nominations
- The first robotics supply-chain partner conference brought together suppliers of actuators, dexterous hands, sensors and AI chips.
- The report also described substantial overlap between XPENG's and Tesla's core robotics suppliers.
Vesoma publicly introduces its humanoid robotics programme
- The company says it began work in December 2025 and has grown to more than 60 people in Munich and Limassol.
- It reports more than 3,500 square metres of laboratory and office space across its two operating locations.
- An alpha humanoid walked on a learned policy within six months; Vesoma 1 remained a separate system in development at the announcement.
SOMA opens sales for mobile and desktop bimanual robots
- Both systems use dual six-degree-of-freedom arms with 620-millimetre reach, 1.5-kilogram per-arm payload and control at up to 500 hertz.
- soma one adds a three-wheel omnidirectional base and lift column, while soma one desktop uses a fixed tabletop base.
- The systems support teleoperation, demonstration capture and policy development through soda OS, with United States shipping quoted at four to six weeks.
Unitree launches 22-DOF Dex5-S dexterous hand
- The hand measures about 102 × 187 × 26 mm in a paired left-and-right measurement, weighs about 620 g and uses an aluminium-alloy shell.
- Each hand is rated for a 2 kg maximum payload and 1 kg continuous payload, with 15–65 V input and 200 W peak power.
- Standard and Pro versions share 22 motorised degrees of freedom; Pro adds tactile sensing, while Ethernet or USB configurations support control rates up to 1,000 Hz.
AgiBot-Henggong Jinan base rolls out its 300th robot
- The base is operated through the AgiBot-Henggong manufacturing structure and the 300th unit was produced by Shandong Henggong Intelligent Manufacturing.
- The production system spans complete-robot manufacturing, assembly and testing across humanoid and quadruped platforms.
- The site targets production scale of 20,000 intelligent robots by the end of 2028; that figure is forward-looking and is not reported output.
Boston Dynamics opens Atlas training center at Hyundai Metaplant
- RMAC operates inside Hyundai Motor Group Metaplant America near Savannah, Georgia and is scheduled to move into a building about ten times larger in 2027.
- The training programme starts with parts logistics and sequencing, with component assembly planned from 2030.
- Hyundai plans 25,000 Atlas units across Hyundai and Kia plants over the coming years and a US production facility rated for 30,000 robots annually.
Genisom AI closes Series B of several hundred million RMB
- UAE-based Stone Venture led the round.
- Hongshan Capital, GDF Financial, Wuzhong Rongyue, Wuzhong Financial Holding, Neusoft, Highpower Technology, Vision Capital and Riyee participated.
PaXini registers for A-share IPO counselling
- The counselling filing was registered on September 20, 2026 and became public the following day.
- PaXini completed its conversion to a joint-stock company in July 2026.
- IPO counselling is a preparatory regulatory step and does not establish that an offering has been approved or completed.
AgiBot and Chimelong announce 300-robot theme-park rollout
- Planned uses span performances, education, visitor guidance, retail and service stations, hotel operations and sports activities.
- The companies are also establishing an embodied-intelligence tourism research institute at the park.
- The launch plan includes a large-scale 5G-A embodied-AI application for tourism.
GigaAI partners with Changjiang Automobile Electronic on embodied AI
- The initial work covers industrial data acquisition, annotation, task-definition templates and validation methods.
- GigaAI plans to integrate its world models, embodied foundation models and software platform with production processes, quality systems and factory equipment.
- If initial scenarios are validated, the partners plan to extend the approach across Wenzhou’s automotive and motorcycle-parts supply chain.
PrimeBOT formally launches Q1 and T1 for sale
- Q1 and T1 each start at RMB19,999; Q1 Explorer costs RMB26,999 and T1 Pro costs RMB29,999.
- Q1 Explorer opens SDK, HDK and hardware expansion interfaces, while T1 Pro adds NVIDIA Orin Nano and upgraded dual-form autonomy features.
- The first authorized experience stores cover seven Chinese cities, including Shanghai, Guangzhou and Shenzhen.
Genisom demonstrates multi-quadruped collaborative transport
- The robot team shares spatial information to localize itself and its peers, plan a route and adjust formation around people, low obstacles and stairs.
- The control stack combines online load-state estimation, joint multi-robot trajectory optimization and whole-body coordinated control.
- Genisom positions the system for heavy-load transport in disaster sites, hazardous-material or radiation zones, industrial plants and mountainous terrain.