Livox

• AVIA

  AVIA

• MID-360

  MID

• Mid-360L
• Mid-360S LiDAR Sensor
• MID-70
• Tele-15

Facilities & manufacturing

• Production setup

  2026-08-30 - Livox delivered 100,000 Mid-360 LiDAR units to Dreame by February 2025. - Dreame

  Source
• Production setup

  2026-08-30 - Livox’s automated HAP automotive-grade LiDAR production line commenced operations in September 2021. - HAP production line - HAP production line

  Source
• Production setup

  2026-08-30 - Livox improved HAP production-test throughput by up to sixfold and first-pass yield from 10% to 95%. - HAP production line - HAP production line

  Source

Operating milestones

• Operating milestone

  2026-08-30 - Livox and Dreame target delivery of more than one million Mid-360 units over the following three years. - Dreame

  Source
• Operating metric

  2026-08-30 - Livox raised dynamic-balance yield above 97% within three months on the HAP production programme. - HAP production line - HAP production line

  Source

• MID-70 with Orchard UGV experimental platform

  Research Experiment - Mounted - A Livox MID-70 tilted at 40 degrees supplied ground point clouds for negative-obstacle detection on an experimental orchard UGV.

  Source
• Tele-15 with Passenger-car multi-lidar SLAM experimental platform

  Research Experiment - Mounted - A Wuhan University passenger-car research rig combined two Livox Tele-15 units, six Horizon lidars and a Livox Hub for multi-lidar mapping experiments.

  Source

Supply chain relationships

• Bosch Sensortec

  Inbound - Sensing Perception - Livox Avia integrates a Bosch Sensortec BMI088 IMU

  Source
• TDK-InvenSense

  Inbound - Sensing Perception - Livox Mid-360S integrates a TDK InvenSense ICM40609 IMU

  Source
• TDK-InvenSense

  Inbound - Sensing Perception - Livox MID-360 integrates a TDK InvenSense ICM40609 IMU

  Source
• TDK-InvenSense

  Inbound - Sensing - A TDK InvenSense ICM40609 inertial measurement unit is integrated into the Livox Mid-360L lidar

  Source
• Bosch Sensortec

  Inbound - Sensing Perception - Livox Tele-15 integrates a Bosch Sensortec BMI088 IMU

  Source
• Fancinnov

  Outbound - Perception - Fancinnov states the assembled Pro Lidar Kit includes a Livox Mid-360 lidar

  Source
• Spirit AI

  Outbound - Sensing Perception - Livox MID-360 lidar provides SLAM sensing on Spirit AI Moz1

  Source
• Unitree

  Outbound - Sensing - Unitree G1 incorporates a Livox MID-360 lidar in its head

  Source
• Leju Robotics

  Outbound - Sensing - Livox Mid-360 lidar is specified for Leju KUAVO 5 showroom compute variant

  Source
• Wimsha Robot

  Outbound - Perception - Livox supplies the Mid-360 lidar integrated into Wimsha Robot's T1 commercial cleaning robot

  Source
• Husarion

  Outbound - Perception - Husarion offers the Livox Mid-360 as a Lynx lidar option

  Source
• Husarion

  Outbound - robotics sensors - Husarion offers the Livox Mid-360 as an integrated Panther lidar configuration

  Source
• Deep Robotics

  Outbound - Perception - Four Livox Mid-360 lidar sensors are documented in the X30 configuration

  Source
• Leju Robotics

  Outbound - Sensing - Livox Mid-360 lidar is specified for Leju KUAVO 4Pro showroom version

  Source
• YellowScan

  Outbound - robotics sensors - YellowScan Mapper+ incorporates a Livox AVIA LiDAR scanner

  Source
• AMOVLAB

  Outbound - Perception - AMOVLAB includes a Livox MID-360 lidar in both current P450 configurations

  Source
• Leju Robotics

  Outbound - Sensing - Livox Mid-360 lidar is specified for Leju KUAVO 4Pro standard version

  Source
• Leju Robotics

  Outbound - Sensing - Livox Mid-360 is an optional lidar for Leju KUAVO 5-W Max B

  Source
• YellowScan

  Outbound - Perception - A Livox Horizon lidar is specified in the YellowScan Mapper

  Source
• LimX Dynamics

  Outbound - Perception - LimX's optional TRON 1 Sensor Expansion Kit includes a Livox MID-360 lidar

  Source
• Dreame

  Outbound - LIDAR - Dreame Roboticmower A1 integrates a Livox Mid-360 LiDAR for navigation and obstacle avoidance

  Source
• HOOKII

  Outbound - Perception - Livox supplies Mid-360 lidar integrated into HOOKII's Neomow X robotic lawn mower

  Source
• Gausium

  Outbound - Perception - Gausium autonomous cleaning robots use Livox Mid-70 LiDAR

  Source
• Differential Robotics

  Outbound - Perception - Differential Robotics C5 integrates a Livox Mid-360 lidar

  Source
• Differential Robotics

  Outbound - Perception - Differential Robotics Non-Convex Alpha integrates a Livox Mid-360 lidar

  Source
• Gen-Song Intelligence

  Outbound - Perception - Livox supplies Mid-360 lidar integrated into Gen-Song Intelligence's FMR forklift-robot series

  Source
• EP Equipment

  Outbound - Perception - Livox supplies Mid-360 lidar integrated into two EP Equipment autonomous-forklift models

  Source
• Quantum Systems

  Outbound - LIDAR - Livox Avia scanners are integrated into Quantum Systems Qube 240 lidar payloads for Trinity F90+

  Source
• Freefly Systems

  Outbound - Perception - Freefly Flux L1 uses Livox avia scanner

  Source
• CiDi

  Outbound - Perception - CiDi selected Livox Horizon and Tele lidar for its L4 autonomous highway trucks in 2020

  Source
• Inertial Labs

  Outbound - LIDAR - Livox Avia lidar is offered in the Inertial Labs RESEPI LITE payload

  Source
• JD.com

  Outbound - Perception - JD Logistics unmanned delivery vehicles use Livox Mid-70 LiDAR

  Source
• AgiBot

  Outbound - LIDAR - AgiBot Expedition A3 Ultra uses a Livox neck lidar; its exact model is unspecified

  Source

Events

• 2026-09-21 - Product Launch - Livox launches Mid-360L 3D lidar for mobile robots

  The sensor weighs 245 g, draws 4.2 W and is rated IP67 for indoor and outdoor robotics integration. Its field of view spans 360 degrees horizontally and 44 degrees vertically, with a 0.1 m blind zone and 100 m cutoff range. Livox published official firmware, documentation, a 3D model and a field-of-view model for Mid-360L on September 21.

  Source
• 2025-05-19 - Capability - Wimsha integrates Livox Mid-360 into cleaning robots

  Wimsha integrated Livox Mid-360 into cleaning robots for 3D perception and autonomous navigation. The robots use Mid-360 for spatial sensing in mobile robot operating environments. The case places Livox lidar inside commercial cleaning-robot navigation rather than only automotive or mapping applications.

  Source
• 2024-11-21 - Product Launch - EP Equipment integrates Livox Mid-360 into autonomous forklift systems

  EP Equipment introduced two autonomous forklift models integrating Livox Mid-360 3D LiDAR and additional sensors. The forklifts use Mid-360 for pallet recognition, autonomous navigation positioning and obstacle avoidance. The integration places Livox sensing hardware inside warehouse vehicle automation and pallet-handling workflows.

  Source
• 2024-05-16 - Capability - Unitree G1 uses Livox Mid-360 3D LiDAR

  Unitree G1 was described with a Livox Mid-360 3D LiDAR and Intel RealSense D435 depth camera. The sensor stack provides 360-degree detection and 3D perception for the humanoid platform. The integration places Livox sensing hardware inside a named humanoid robot perception stack.

  Source
• 2023-11-22 - Partnership - DEEP Robotics equips X30 with four Livox Mid-360 lidars

  Each Mid-360 covers a 360-degree horizontal and 59-degree vertical field of view while producing 200,000 points per second. The four-sensor layout reduces blind spots and supports terrain perception and obstacle avoidance on stairs and other complex surfaces. Livox presents the configuration for industrial inspection and emergency-response settings including power stations, factories and utility corridors.

  Source
• 2023-01-10 - Product Launch - Livox releases Mid-360 LiDAR for mobile robotics

  Livox released Mid-360, a compact 360-degree hybrid solid-state LiDAR sensor designed for low-speed robotics. The product is optimized for mobile robot navigation, SLAM and obstacle avoidance. The launch became a core Livox robotics sensor milestone for AMRs, service robots and outdoor mobile platforms.

  Source
• 2022-07-11 - Production Milestone - Livox opens HAP for public order and scales automotive-grade LiDAR manufacturing

  Livox opened HAP for order and described a new intelligent manufacturing center for automotive-grade LiDAR production. The manufacturing setup included fully automated LiDAR assembly lines to improve production efficiency and quality consistency.

  Source
• 2021-04-14 - Product Launch - Livox releases HAP automotive-grade LiDAR

  Livox released HAP, its first automotive-grade LiDAR for the automobile mass-production market. The product had reached more than 2,000 clients across autonomous driving, robotics and smart city segments. HAP extended the company beyond low-speed robotics sensors into higher-volume automotive perception markets.

  Source
• 2020-12-01 - Deployment - Livox MID-70 supports JD Logistics delivery vehicles in Changshu

  A first batch of about 10 delivery vehicles entered daily operation in Changshu, Jiangsu, in October 2020. Several MID-70 sensors provided combined surrounding 3D perception for navigation and obstacle detection. Livox described the vehicles as an L4 system; the case study focuses on their delivery configuration and operating location.

  Source
• 2020-10-26 - Product Launch - Livox launches MID-70 lidar for low-speed autonomous vehicles

  MID-70 provides a 70.4-degree circular field of view and a 5 cm minimum detection distance. Gaussian Robotics had ordered 10,000 MID-70 units in July 2020 after evaluating the sensor. The launch price was US$799, with availability through DJI’s online shop; this is historical pricing.

  Source
• 2020-01-08 - Deployment - Gaussian Robotics uses Livox LiDAR in low-speed mobile robots

  Gaussian Robotics used Livox Mid-series LiDAR sensors in low-speed mobile robots. Livox semi-automated production capacity supported hundreds of Mid units per day for customer volume orders. The case links Livox sensing hardware to cleaning and service robots from a named mobile-robot manufacturer.

  Source
• 2020-01-06 - Product Launch - Livox introduces Tele-15 long-range lidar at CES 2020

  The non-repetitive scan covered 99.8% of a roughly 15-degree circular field in 0.1 seconds. A point-cloud demonstration captured a building 497 m away. Chinese launch pricing was RMB 9,000; shipments were planned for the second quarter of 2020.

  Source

Relationships

• FAW Jiefang

  Documented Integration - Livox Horizon LiDAR was installed on the FAW Jiefang J7 L3 autonomous heavy truck.

Comparable profiles

• Hesai Technology

  comparable profile - Automotive LIDAR Supplier · Mobile Robot LIDAR Supplier

• Ouster

  comparable profile - Automotive LIDAR Supplier · Mobile Robot LIDAR Supplier

• MicroVision

  comparable profile - Automotive LIDAR Supplier · Mobile Robot LIDAR Supplier

• Seyond

  comparable profile - Automotive LIDAR Supplier · Mobile Robot LIDAR Supplier

• RoboSense

  comparable profile - Automotive LIDAR Supplier · Mobile Robot LIDAR Supplier

• Aeva Technologies

  comparable profile - Automotive LIDAR Supplier

• LDROBOT

  comparable profile - Mobile Robot LIDAR Supplier

• LightWare LiDAR

  comparable profile - Mobile Robot LIDAR Supplier

• AEye Inc

  comparable profile - Automotive LIDAR Supplier

• SICK AG

  comparable profile - Mobile Robot LIDAR Supplier

• Hokuyo Automatic Co., Ltd.

  comparable profile - Mobile Robot LIDAR Supplier

• Innoviz Technologies

  comparable profile - Automotive LIDAR Supplier

Shared workflows

• BYD

  workflow adjacency - Automotive Perception

• Geely Auto Group

  workflow adjacency - Automotive Perception

• Arbe Robotics Ltd.

  workflow adjacency - Automotive Perception

• Valeo

  workflow adjacency - Automotive Perception

• CamSense

  workflow adjacency - LIDAR Navigation Mapping

• Yinjia Technology

  workflow adjacency - Automotive Perception

• Exyn

  workflow adjacency - LIDAR Navigation Mapping

• AUMOVIO

  workflow adjacency - Automotive Perception

• GRYFN

  workflow adjacency - LIDAR Navigation Mapping

• BoE Systems

  workflow adjacency - LIDAR Navigation Mapping

• VIAMETRIS

  workflow adjacency - LIDAR Navigation Mapping

Context tags

• LiDAR sensor supplier - Stack Layer - Context audit 2026-09-07: Mid-360 supplies compact LiDAR hardware for robot perception and navigation. https://www.livoxtech.com/mid-360
• Mobile robot LiDAR supplier - Peer Group - Context audit 2026-09-07: Mid-360 supplies compact LiDAR hardware for robot perception and navigation. https://www.livoxtech.com/mid-360
• Automotive LiDAR supplier - Peer Group - Context audit 2026-09-07: Tele-15 is a dedicated long-range automotive LiDAR sensor, independently of Mid-series robot sensors. https://www.livoxtech.com/tele-15
• LiDAR navigation and mapping - Workflow - Context audit 2026-09-07: Mid-360 supplies compact LiDAR hardware for robot perception and navigation. https://www.livoxtech.com/mid-360
• Automotive perception - Workflow - Context audit 2026-09-07: Tele-15 is a dedicated long-range automotive LiDAR sensor, independently of Mid-series robot sensors. https://www.livoxtech.com/tele-15
• LiDAR sensor hardware - Stack Layer - LiDAR sensor hardware used in robotics and autonomous systems
• Perception hardware - Stack Layer - Sensing hardware for robot perception and navigation
• Component supply - Commercial Stage - Core business: LiDAR sensor components and modules
• Sensing payload supplier - Stack Layer - Core peer group: LiDAR sensor supplier for robotics
• LiDAR perception - Capability - Core product: LiDAR sensors for perception and mapping
• Farms and orchards - Customer Environment - Agricultural environments for LiDAR-based perception
• Factories - Customer Environment - Industrial and manufacturing environments for LiDAR deployment