Browse page 23 of the Korthos verified robotics events archive, with dated funding, deployment, product, partnership, acquisition, and research records.
The integration uses a 400 V architecture to reduce current and line losses at a given power output.
Motor and ESC temperature sensors transmit real-time operating data over CAN bus.
The source names surveying, emergency response, inspection and monitoring as intended mission categories, without identifying the aircraft maker or an operating deployment.
Reinforcement learning has become the prevailing approach to humanoid locomotion control: policies transfer reliably from simulation to hardware and recover gracefully from disturbances. Motion quality, however, still lags behind: task-only rewards often converge to stiff, asymmetric gaits, while motion imitation methods improve appearance but become more sensitive to external disturbances because reference signals can oppose the transient poses needed to regain balance.
Experiments use G1 as the physical evaluation platform.
The reported results provide an independent evaluation on G1 hardware.
Stord said Nirmal Doshi joined the company as part of a wave of talent from leading robotics and AI companies.
Doshi brings robotics and operational experience from Amazon, Agility Robotics and Symbotic.
Stord framed the hire around building a physical-intelligence layer for commerce on top of its vertically integrated logistics network, software stack and real-world fulfillment data.
By integrating advanced sensor, battle management and missile technologies, Lockheed Martin delivers a decisive C-UAS capability that aligns with our customers’ needs for agile and distributed lethality.
THE BIG PICTURE Sanctum’s sensors detected and tracked a hostile Unmanned Aerial Vehicle (UAV), the Sanctum mission management software processed the engagement, and the GRIZZLY launcher fired a JAGM missile neutralizing the target.
Engineers retargeted high-fidelity motion-capture data to Atlas, then trained the whole-body policy across thousands of parallel simulations.
The maneuver combined a fake step-over, crossed-leg strike, aerial motion and balance recovery, exercising locomotion and manipulation in one controller.
The new Proteus can receive conversational task prompts and determine task priority, route and timing while moving loads beyond its earlier dock-area scope.
Vulcan and the STARK tote-handling system are part of a planned robotics expansion across European fulfillment sites; STARK is scheduled for 15 sites by 2027.
The robotics programme sits within more than €10 billion of planned European fulfillment-center investment, while Proteus deployment in Europe is targeted for the first half of 2027.
A binding first-stage engagement covers Phasor Innovation’s quantum sensing and navigation technology.
The multi-stage programme is expected to generate A$1.0 million to A$1.2 million over 15 months.
Hydrix is contributing electronics, mechanical, thermal and embedded-systems engineering for GPS-denied undersea, surface, airborne and land applications.
DoD Solution secured an undisclosed standalone investment from Network.VC Defense within its open pre-seed round to develop onboard AI and autonomy infrastructure for UAVs.
Taiwan's Metal Industries Research & Development Centre signed an MOU with Anduril covering UAV development, autonomous systems and key drone components.
The cooperation covers supply-chain integration, localized production and technology exchange across Taiwan's drone manufacturing base.
Taiwan's Industrial Development Administration said more than 10 Taiwanese companies had secured Anduril trial or mass-production orders for UAV airframe structures, payload equipment and power systems.
PDW said it entered into a definitive agreement to acquire Vanteon Corporation, a Rochester, NY-based electronics systems design and engineering company.
The company said Vanteon adds more than 40 years of advanced communications, RF systems, embedded systems and software-defined radio experience.
PDW framed the acquisition around resilient communications, integrated warfighter capabilities and faster innovation across its tactical drone portfolio.
Mobix Labs signed a binding letter of intent to acquire Vision Aerial, a Montana manufacturer of U.S.-built drones.
The proposed acquisition would add complete aircraft and aerial-intelligence capabilities to Mobix's electronics, connectivity, RF and sensing portfolio.
Amazon unveiled a next-generation Proteus autonomous mobile robot at its Delivering the Future event in Dartford, UK, as part of a €10 billion European fulfillment-network investment.
The upgraded Proteus can interpret conversational prompts and independently determine task priorities, routes, and timing for warehouse movement work.
Unlike the current Proteus systems that operate in dock areas, the new model is designed to operate across broader warehouse floors, with European rollout planned for the first half of 2027.
1X launched the 1X World Model Lab to focus on large-scale embodied world-model pretraining for humanoid robots.
The lab is led by Sam Sinha, who previously worked on large-scale multimodal generative foundation models at Luma AI.
1X said the lab will combine web-scale media, egocentric human videos, simulation, dexterous teleoperated robot data, and on-policy NEO data to improve real-world humanoid deployment.
The $11.2 million award covers delivery of more than 45 advanced CBRN unmanned-aircraft kits to the U.S. Army.
Each kit centres on an R80D SkyRaider configured with modular chemical, biological and radiological payloads, including the MUVE B330 biological sensor.
The systems are designed to map and characterize hazards while keeping soldiers outside contaminated areas; deliveries were expected to begin in the second quarter of 2026.
Daimon Robotics completed a RMB 100 million-class Series A round jointly invested by Inovance Industrial Investment and China Telecom.
The financing will support large-scale datasets with physical interaction information, physical world-model research, and data-flywheel development for real-world manipulation.
Daimon focuses on high-resolution vision-based tactile sensing, tactile dexterous hands, teleoperation data collection, and Vision-Tactile-Language-Action manipulation models.
As part of the events, alongside showcasing the VR-H3 humanoid robot, VinRobotics also participated in technical talks featuring leading global industry names such as Google DeepMind, NVIDIA, and Boston Dynamics.
These presentations drew strong interest from industry experts, expanding VinRobotics’ connections within the global technology ecosystem while reinforcing the potential of Vietnamese enterprises in core AI and robotics technologies.
MoDex introduces a diffusion-policy approach for sequentially grasping multiple objects with a single dexterous hand.
The authors evaluate the method in simulation on a Franka Emika Panda robot with an Allegro Hand and run 90 real-world grasping sequences on matching hardware.
The VASO paper introduces a self-evolving robot-skill method that turns formal-verification counterexamples into updates for reusable skill contracts.
The paper evaluates Clearpath Jackal and PX4 quadcopter tasks and reports 97.2% formal-specification compliance using fewer than 100 optimization samples.
The debut included ICRA 2026, Festival der Roboter, Vietnam Robot Tech Day and COMPUTEX 2026.
The event signaled VinRobotics entry onto the international humanoid robotics stage.
The product gives VinRobotics debuts VR-H3 humanoid robot globally a concrete offering for robot manipulation, haptics or human-assistive robotics workflows.
VinRobotics showcased its VR-H3 humanoid robot platform across global technology events including ICRA 2026 and COMPUTEX Taipei 2026.
Vingroup said VR-H3 was developed by a Vietnamese team across mechanical structure, electrical/electronic architecture, power distribution, battery systems and full-body AI control.
The platform includes more than 31 actuators, two onboard edge computers, human interaction, object transport and assembly-task capabilities.
Shifters raised a $10.2 million seed round led by Ace Capital Partners, bringing disclosed total funding to more than $15 million.
The company is building autonomous robotic teams for dangerous ground missions in complex and high-risk environments.
The funding supports Shifters' "robots go first" mission for defense, security, ISR, tunnels, rubble, hazardous areas, and other environments where mobility and autonomous decision-making are critical.
The radar company demonstrated its sensor stack inside the Anduril Lattice for Air Defense platform, the primary landing zone for Integrated Battle Command System-Maneuver (IBCS-M).
Operation Jailbreak kicked off at Fort Carson, Colorado in May 2026 as a months-long sprint to expose interfaces for legacy and new systems.
The system combines a Unitree H2 Plus humanoid body, Sharpa five-fingered hands, Jetson Thor onboard computing, and NVIDIA's Isaac GR00T software stack.
Onboard computing comes from the Jetson AGX Thor T5000, based on NVIDIA's Blackwell architecture.
mass-production delivery; recipient subsidiary kept exact Exact scope: UISEE Validates Global Readiness with Overseas Mass Production of ADAS Functions for the Right-Hand Drive Landian E5 Plus
The record is scoped to the announced collaboration and does not imply a completed deployment or exclusive arrangement.
Echodyne’s patented MESA radars are designed to deliver the precision airspace awareness needed to support evolving public safety drone operations, including Axon Air and Dedrone solutions from Axon.
There is increasing demand globally for comprehensive detailed awareness of the low altitude airspace in which drones are proliferating.
AeroVironment announced plans to invest 15 million dollars to expand advanced production capabilities in Greene County, Ohio, near Dayton.
The expansion adds approximately 44,000 square feet across Beavercreek and Xenia for pilot-scale and mid-volume production, integration and testing.
The company said the work strengthens its domestic manufacturing footprint and supports critical defense programs, including AFRL-linked advanced biotechnology materials and components.
Safe Pro said it received a U.S. Army order for a turnkey Threat Analysis Kit built around its NODE edge-compute system and Red Cat Black Widow drones.
The order also covers annual AI model and algorithm upgrades, training and operational field support.
Safe Pro said the kit is intended as a field-ready battlefield intelligence capability for processing drone-captured visual data.
Rajant was selected as a Phase 2 qualifier for the U.S. Department of Defense Drone Dominance Program.
The programme is led by the Defense Innovation Unit with the Test Resource Management Center and focuses on attritable autonomous systems in contested environments.
Rajant will continue developing and demonstrating Kinetic Mesh vehicle-to-vehicle communications for coordinated autonomous operations across air, land and sea.
KULR entered a prototype battery development and fabrication agreement with a U.S.-based military drone manufacturer.
The work covers system-level design, battery architecture development, prototype fabrication, functional and safety testing, and documentation for UAVs and handheld controllers.
The agreement supports domestic defense drone production as the Pentagon accelerates low-cost unmanned aircraft procurement through the Drone Dominance initiative.
Andreessen Horowitz announced that it led Westmag's seed round to build American motor and actuator manufacturing for drones, humanoids, and industrial robots.
Westmag designs and manufactures drone motors and robot actuators from Factory 01 in South San Francisco, with a domestic and allied supply chain.
The company is scaling qualified motors for defense customers while serving robotics companies with actuators.
FieldAI and Ouster announced a collaboration to integrate Ouster's Rev8 native color lidar into FieldAI's general-purpose robots for complex, unstructured environments.
FieldAI currently uses Ouster digital lidar to help robots navigate unmapped and GPS-denied environments, and plans to expand Rev8 use as it scales industrial deployments.
The collaboration targets field robotics use cases across construction, mining, energy, manufacturing, security, and government sectors.