Universal Robots

• UR10e
• UR10g-1750

  g-Series

• UR12e
• UR15
• UR16e

  e-Series

• UR17g-1300

  g-Series

• UR18
• UR18g-950

  g-Series

• UR20
• UR30
• UR3e
• UR5e
• UR7e
• UR8 Long

  UR Series

Output & shipments

• Shipments

  2026-10-21 - The partners report hundreds of UR robots already shipped in dual-arm systems to live customer sites across Europe. - Universal Robots’ own complete cobot arms shipped within Sereact-built dual-arm systems to European customer sites; not a count of dual-arm stations.

  Source
• Shipments

  2025-05-13 - Universal Robots reached 100,000 cobots sold worldwide across its collaborative robot portfolio. - Universal Robots cobot portfolio - worldwide cobot deployments

  Source

• UR5e with HABILIS Brain 0

  Research Experiment - Controlled By - Universal Robots UR5e was used in Tommoro HABILIS Brain 0 manipulation demonstrations.

  Source
• UR5e with GelSight Mini

  Research Experiment - Mounted - Four ContactBench tasks use custom UR5e gripper fingers equipped with GelSight Mini sensors.

  Source
• UR5e with WSG50 gripper; exact50-110 variant unspecified

  Research Experiment - Mounted - ContactBench uses a WSG50 parallel-jaw gripper on UR5e, with task-specific tactile or Fin-Ray fingers.

  Source
• UR5e

  Research Experiment - Mounted - ContactBench physical experiments use a RealSense D435i wrist camera on a UR5e.

  Source
• UR3e with D455

  Research Experiment - Connected - UR3e was evaluated with RealSense D455 providing the third-person camera view.

  Source
• UR5e with RealSense D405

  Research Experiment - Mounted - UR5e was evaluated with RealSense D405 mounted at the wrist.

  Source
• UR5e with D455

  Research Experiment - Connected - UR5e was evaluated with RealSense D455 providing the third-person camera view.

  Source
• UR20 with ADAR One

  Physical Demo - Mounted - beRobox demonstrated a PALTZ palletizer with a UR20 arm and arm-mounted Sonair ADAR One safety sensor at PACK EXPO.

  Source
• UR3e with RealSense D405

  Research Experiment - Mounted - UR3e was evaluated with RealSense D405 mounted at the wrist.

  Source
• UR5e with Intel RealSense D435i cameras

  Research Experiment - Tested With - FlowVLA’s physical evaluation uses a UR5e arm with two Intel RealSense D435i cameras.

  Source
• UR10e with Shadow Teleoperation System

  Physical Demo - Mounted - Shadow Robot’s teleoperation system physically mounts its dexterous hands on Universal Robots UR10e arms.

  Source
• UR5e with Schaeffler Group USA manufacturing cell configuration

  Operational - Mounted - Schaeffler Group USA manufacturing cell uses UR5e in the configuration documented by Universal Robots.

  Source
• UR5e with FT-Produktion machine-tending cell configuration

  Operational - Mounted - FT-Produktion machine-tending cell uses UR5e in the configuration documented by Universal Robots.

  Source
• UR10e with EVCO Plastics manufacturing cells configuration

  Operational - Mounted - EVCO Plastics manufacturing cells uses UR10e in the configuration documented by Universal Robots.

  Source
• UR12e with Mercedes-Benz glue-application cell configuration

  Operational - Mounted - Mercedes-Benz glue-application cell uses UR12e in the configuration documented by Universal Robots.

  Source
• UR5e with Vitesco Technologies manufacturing cell configuration

  Operational - Mounted - Vitesco Technologies manufacturing cell uses UR5e in the configuration documented by Universal Robots.

  Source
• UR10e with Danish Crown processing line configuration

  Operational - Mounted - Danish Crown processing line uses UR10e in the configuration documented by Universal Robots.

  Source
• UR10e with Brandt painting cell configuration

  Operational - Mounted - Brandt painting cell uses UR10e in the configuration documented by Universal Robots.

  Source
• UR10e with Siemens GWE manufacturing cell configuration

  Operational - Mounted - Siemens GWE manufacturing cell uses UR10e in the configuration documented by Universal Robots.

  Source
• UR10e with SEAT Componentes quality-control cells configuration

  Operational - Mounted - SEAT Componentes quality-control cells uses UR10e in the configuration documented by Universal Robots.

  Source
• UR10e with Ket-Met machine-tending cell configuration

  Operational - Mounted - Ket-Met machine-tending cell uses UR10e in the configuration documented by Universal Robots.

  Source
• UR10e with Pentik production cell configuration

  Operational - Mounted - Pentik production cell uses UR10e in the configuration documented by Universal Robots.

  Source
• UR3e with OptiPro Systems optics-manufacturing cell configuration

  Operational - Mounted - OptiPro Systems optics-manufacturing cell uses UR3e in the configuration documented by Universal Robots.

  Source
• UR10e with RCM Industries dual-spindle CNC cell configuration

  Operational - Mounted - RCM Industries dual-spindle CNC cell uses UR10e in the configuration documented by Universal Robots.

  Source
• UR5e with Olympus operating configuration

  Operational - Mounted - Olympus used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR10e with New England Union Company operating configuration

  Operational - Mounted - New England Union Company used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR5e with Magneti Marelli operating configuration

  Operational - Mounted - Magneti Marelli used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR3e with Labman Automation operating configuration

  Operational - Mounted - Labman Automation used Universal Robots UR3e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Hofmann Glastechnik operating configuration

  Operational - Mounted - Hofmann Glastechnik used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR10e with HAILO operating configuration

  Operational - Mounted - HAILO used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR16e with Guangzhou Li Gong Industry operating configuration

  Operational - Mounted - Guangzhou Li Gong Industry used Universal Robots UR16e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Endutec operating configuration

  Operational - Mounted - Endutec used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR5e with DWD Group operating configuration

  Operational - Mounted - DWD Group used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR10e with DCL Logistics operating configuration

  Operational - Mounted - DCL Logistics used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR5e with Coty Cosmetics operating configuration

  Operational - Mounted - Coty Cosmetics used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR20 with OPW, a Dover company operating configuration

  Operational - Mounted - OPW, a Dover company used Universal Robots UR20 in an operating configuration documented by Universal Robots.

  Source
• UR10e with Bernacki Industrial Services operating configuration

  Operational - Mounted - Bernacki Industrial Services used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Allied Moulded Products operating configuration

  Operational - Mounted - Allied Moulded Products used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR5e with Albrecht Jung operating configuration

  Operational - Mounted - Albrecht Jung used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Aido Industry operating configuration

  Operational - Mounted - Aido Industry used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR20 with Ornua operating configuration

  Operational - Mounted - Ornua used Universal Robots UR20 in an operating configuration documented by Universal Robots.

  Source
• UR10e with Napco Brands operating configuration

  Operational - Mounted - Napco Brands used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR5e with AIM Processing operating configuration

  Operational - Mounted - AIM Processing used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR16e with Sanofi operating configuration

  Operational - Mounted - Sanofi used Universal Robots UR16e in an operating configuration documented by Universal Robots.

  Source
• UR5e with Fluidics Instruments operating configuration

  Operational - Mounted - Fluidics Instruments used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Carriere Industrial Supply operating configuration

  Operational - Mounted - Carriere Industrial Supply used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR20 with Raumland operating configuration

  Operational - Mounted - Raumland used Universal Robots UR20 in an operating configuration documented by Universal Robots.

  Source
• UR20 with Dallas College operating configuration

  Operational - Mounted - Dallas College used Universal Robots UR20 in an operating configuration documented by Universal Robots.

  Source
• UR20 with Migatronic operating configuration

  Operational - Mounted - Migatronic used Universal Robots UR20 in an operating configuration documented by Universal Robots.

  Source
• UR10e with DeAngelo Marine Exhaust operating configuration

  Operational - Mounted - DeAngelo Marine Exhaust used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR5e with Andrew Pearce Bowls operating configuration

  Operational - Mounted - Andrew Pearce Bowls used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR5e with Schneider Electric Belgium operating configuration

  Operational - Mounted - Schneider Electric Belgium used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR20 with Bob’s Red Mill operating configuration

  Operational - Mounted - Bob’s Red Mill used Universal Robots UR20 in an operating configuration documented by Universal Robots.

  Source
• UR16e with BWIndustrie operating configuration

  Operational - Mounted - BWIndustrie used Universal Robots UR16e in an operating configuration documented by Universal Robots.

  Source
• UR16e with Toyota Motor Hokkaido operating configuration

  Operational - Mounted - Toyota Motor Hokkaido used Universal Robots UR16e in an operating configuration documented by Universal Robots.

  Source
• UR5e with Go Fast Campers operating configuration

  Operational - Mounted - Go Fast Campers used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR10e with MT Solar operating configuration

  Operational - Mounted - MT Solar used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR3e with SESI/SENAI operating configuration

  Operational - Mounted - SESI/SENAI used Universal Robots UR3e in an operating configuration documented by Universal Robots.

  Source
• UR20 with THG Automation operating configuration

  Operational - Mounted - THG Automation used Universal Robots UR20 in an operating configuration documented by Universal Robots.

  Source
• UR10e with Zantech operating configuration

  Operational - Mounted - Zantech used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR3e with Moravian-Silesian vocational schools operating configuration

  Operational - Mounted - Moravian-Silesian vocational schools used Universal Robots UR3e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Vattholma Mekano operating configuration

  Operational - Mounted - Vattholma Mekano used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR5e with Toolcraft operating configuration

  Operational - Mounted - Toolcraft used Universal Robots UR5e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Temar operating configuration

  Operational - Mounted - Temar used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Siouxland Fabricating operating configuration

  Operational - Mounted - Siouxland Fabricating used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Seng Heng Engineering operating configuration

  Operational - Mounted - Seng Heng Engineering used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Raymath operating configuration

  Operational - Mounted - Raymath used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR10e with PMI operating configuration

  Operational - Mounted - PMI used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Osaka Nursery operating configuration

  Operational - Mounted - Osaka Nursery used Universal Robots UR10e in an operating configuration documented by Universal Robots.

  Source
• UR10e with Toyota Industries configuration

  Operational - Mounted - Toyota Industries Tochita engine plant uses a UR10e for raw-material input.

  Source
• UR12e with Multiply Labs configuration

  Operational - Mounted - Multiply Labs cell-therapy robotic cluster uses UR12e cobots for cleanroom manipulation.

  Source
• UR12e with Centerline Brackets configuration

  Operational - Mounted - Centerline Brackets operates a UR12e welding cell reported to have passed one million welds.

  Source
• UR5e with SIMP Production configuration

  Operational - Mounted - Emanor integrated a UR5e gluing and assembly cell at SIMP Production.

  Source
• UR10e with STIVAL configuration

  Operational - Mounted - TD Conception integrated a UR10e sheet-metal chamfering cell at STIVAL.

  Source
• UR10e with Trametal configuration

  Operational - Mounted - GAPE integrated a UR10e welding cell for small and medium production runs at Trametal.

  Source
• UR10e with KSB Sequedin configuration

  Operational - Mounted - JL Corp integrated a UR10e for water-pump impeller balancing at KSB.

  Source
• UR5e with Repack-S configuration

  Operational - Mounted - Isycod deployed a UR5e across two production applications at Repack-S.

  Source
• UR3e with Sensata Technologies Malaysia configuration

  Operational - Mounted - Sensata Malaysia operates dozens of UR3e and UR5e cobots in production autoloading.

  Source
• UR12e with Natura configuration

  Operational - Mounted - Natura uses a UR12e on its EKOS packing line.

  Source
• UR10e with USIMINAS configuration

  Operational - Mounted - USIMINAS uses a UR10e, now marketed as UR12e, for steel-coil marking.

  Source
• UR5e with VCN Industries configuration

  Operational - Mounted - Archytas Robotics integrated a UR5e into VCN Industries medical-part engraving cell.

  Source
• UR10e with Verus Digital GmbH configuration

  Operational - Mounted - Verus Digital CultArm3D uses a UR10e for automated cultural-object digitisation.

  Source
• UR3e with Mandom configuration

  Operational - Mounted - Mandom built an unmanned production line using UR3e, UR5e and UR10e cobots.

  Source
• UR12e with Fu Zhuan Steel configuration

  Operational - Mounted - Fu Zhuan Steel uses a UR12e for high-mix laser welding.

  Source
• UR3e with THEMAGIC5 configuration

  Operational - Mounted - THEMAGIC5 uses UR3 and UR3e cobots for custom swim-goggle finishing.

  Source
• UR7e with GMPack configuration

  Operational - Mounted - GMPack uses a UR7e in Technicon modular high-mix packaging automation.

  Source
• UR20 with Assars configuration

  Operational - Mounted - Assars operates a UR20 with Nordbo and Mimic technology for automated powder-coating touch-up.

  Source

Supply chain relationships

• Skild AI

  Inbound - Software - Skild AI announced plans to integrate Skild Brain into Universal Robots cobots

  Source
• Orbbec

  Inbound - Perception - Orbbec Gemini 335Lg was integrated into the announced UR AI Accelerator developer platform

  Source
• Jintuo Technology

  Inbound - Structural Components - Universal Robots ordered precision structural parts from Jintuo for new cobot models

  Source
• Flex

  Inbound - Manufacturing - Flex manufactures key robotics components for Universal Robots cobots

  Source
• NVIDIA

  Inbound - Robotics Compute And Software - Universal Robots and NVIDIA developed the AI Accelerator using NVIDIA Isaac, CUDA libraries and Jetson AGX Orin

  Source
• Kollmorgen

  Inbound - actuation and motion control - Kollmorgen supplies adapted KBM frameless motors for articulation axes in Universal Robots’ UR5 and UR10

  Source
• Orbbec

  Inbound - Perception - Orbbec Gemini 305g cameras are integrated into Universal Robots UR AI Trainer

  Source
• Analog Devices

  Inbound - Motion Control - ADI supplies sensing, measurement and power technology used to optimize Universal Robots cobot joints

  Source
• Leaderdrive

  Inbound - robotic motion components - Leaderdrive began batch supply of harmonic reducers to Universal Robots under a 2016 framework agreement

  Source
• Harmonic Drive SE

  Inbound - robotic motion components - Harmonic Drive SE gears with output bearings are used in all six axes of Universal Robots UR3e-UR16e cobots

  Source
• RLS

  Inbound - robotic motion components - RLS AksIM absolute magnetic encoders provide joint-angle feedback in Universal Robots cobot joints

  Source
• beRobox

  Outbound - Robotic Arm - Universal Robots supplies the UR20 arm incorporated into beRobox’s PALTZ.GO palletizer

  Source
• Neobotix

  Outbound - Manipulation - Neobotix offers EMROX configurations with Universal Robots cobot arms

  Source
• Hirebotics

  Outbound - Robot Platform - Hirebotics Cobot Welder incorporates a Universal Robots UR8 Long arm

  Source
• Hirebotics

  Outbound - Robot Platform - Hirebotics Cobot Cutter incorporates a Universal Robots UR8 Long arm

  Source
• Husarion

  Outbound - Manipulation - Husarion offers integrated Universal Robots UR3e and UR5e manipulators for Lynx

  Source
• Drim Robotics

  Outbound - Complete Robot Platform - Drim Robotics' delivered Stellantis Tychy door-water-shield cell uses a Universal Robots cobot

  Source
• Canvas

  Outbound - actuation and motion control - Canvas incorporates Universal Robots UR10e arms in its mobile drywall-finishing systems

  Source
• Sereact

  Outbound - Industrial Robotic Equipment - UR cobot arms equip Sereact dual-arm systems; hundreds shipped to operating European sites. Quantity counts arms, not stations

  Source
• Raise Robotics

  Outbound - actuation and motion control - Universal Robots supplies UR10e and UR20 arms used as the manipulation platform in Raise construction robots

  Source
• Mobile Industrial Robots (MiR)

  Outbound - Manipulation - Universal Robots supplies UR20 and UR30 collaborative robot arms for MiR MC600 mobile manipulator

  Source
• Bene Solutions

  Outbound - Oem Builders - Universal Robots supplied the UR10 used by Bene Solutions in COBOT++ at Saunier Duval

  Source
• iQanto

  Outbound - Equipment - Universal Robots supplies Universal Robots collaborative robots for iQanto Stellantis Sochaux screwdriving installation

  Source
• SERMAZ

  Outbound - Oem Builders - Universal Robots UR10 is used in SERMAZ's delivered Lactalis palletizing solution

  Source
• Clearpath Robotics

  Outbound - End Effectors - Clearpath's Husky mobile manipulator configuration integrates a Universal Robots UR5 manipulator arm

  Source
• Husarion

  Outbound - Manipulation - Husarion offers Universal Robots manipulators as integrated arm configurations for Panther

  Source
• PCC Robotics

  Outbound - Oem Builders - Universal Robots UR10e is included in PCC Robotics' delivered WST Fab machine-tending system

  Source
• E-COBOT

  Outbound - Complete Robot Platform - E-COBOT integrates a Universal Robots UR10e into its delivered CAVAC palletizing cell

  Source

• Jean-Pierre Hathout - President, Teradyne Robotics Group and Universal Robots - Hathout leads Universal Robots collaborative automation strategy and the broader Teradyne Robotics group across cobots and AMRs.

• Tommoro Robotics introduces HABILIS Brain 0 vision-language-action model

  2026-10-09 - Research Publication - The company reports 95.20% success for GC-VLA and 99.55% with GCRF on the LIBERO simulation benchmark. Tommoro reports 400 consecutive logistics-picking successes using Rainbow Robotics RB-Y1, alongside demonstrations on UR5e and ROBOTIS AI Worker. The model is designed for multiple robot embodiments; manufacturing and logistics field validation remain part of the commercialization programme.

  Source

Media library

• Universal Robots headquarters

  image · Universal Robots

  Source
• Universal Robots headquarters opening

  image · Universal Robots

  Source

Official corporate-responsibility reporting and press-authorized company media for Universal Robots. Routine news and ordinary press releases are excluded.

• Universal Robots CSR Report 2025

  PDF · Corporate responsibility 2025 · Universal Robots

  Source
• Universal Robots media assets

  WEB · Company and products · Universal Robots

  Source

Events

• 2026-10-21 - Partnership - Teradyne Robotics and Sereact formalize physical-AI partnership

  Applications include returns handling, replenishment, piece picking, sortation and kitting. The GTC demonstration uses two UR 12 e-1300 arms to mirror returns handling at operating logistics sites. Zalando sites in Greven and Świebodzin, operated with CEVA Logistics, illustrate the existing deployment base.

  Source
• 2026-10-19 - Product Launch - beRobox launches arm-mounted 3D Dynamic Safety for PALTZ

  The protective area moves with robot position, combining arm-state information with three-dimensional presence detection. The companies say the system can allow a pallet change at one station while palletizing continues at the other, subject to the safety configuration. The module is being demonstrated with a Universal Robots UR20 at PACK EXPO International in Chicago.

  Source
• 2026-10-09 - Research Publication - Tommoro Robotics introduces HABILIS Brain 0 vision-language-action model

  The company reports 95.20% success for GC-VLA and 99.55% with GCRF on the LIBERO simulation benchmark. Tommoro reports 400 consecutive logistics-picking successes using Rainbow Robotics RB-Y1, alongside demonstrations on UR5e and ROBOTIS AI Worker. The model is designed for multiple robot embodiments; manufacturing and logistics field validation remain part of the commercialization programme.

  Source
• 2026-10-05 - Funding - Teradyne invests in Bright Machines alongside planned manufacturing collaboration

  Proposed applications include precision robotic assembly, test-equipment loading and unloading, and autonomous material movement. The companies aim to connect assembly, robot-operation and electrical-test data into a continuous production record. Bright Machines reports experience from more than 130 microfactory deployments across over 10 countries.

  Source
• 2026-09-14 - Product Launch - Universal Robots launches Gen 7 platform and three g-Series cobots

  The three arms cover 1,750 mm, 1,300 mm and 950 mm reach; their wrist interfaces add power, safety and high-bandwidth data connections. CB7 offers 40% more compute in a 30% smaller enclosure, with the TP7 teach pendant and PolyScope X forming the control platform. ROS 2 and open APIs support external automation and edge-AI software; Universal Robots’ installed-base figure above 100,000 applies across its cobot portfolio.

  Source
• 2026-07-06 - Deployment - Drim Robotics deploys AI-guided door-seal rolling cobot

  A vision camera images each door water-shield embossing before the rolling cycle begins. Cognex artificial-intelligence software corrects coordinates and calculates the cobot's optimal movement path. Universal Robots Force Mode maintains pressure while a roller seats the adhesive bead.

  Source
• 2026-07-06 - Deployment - Drim Robotics deploys cobot for vehicle overpaint finishing

  A Universal Robots cobot uses a Mirka rotary brush to clean and finish body components. Drim handled mechanical and electrical engineering, software development, installation and system commissioning. The production cell improves finish repeatability while reducing operator burden and line downtime.

  Source
• 2026-06-24 - Partnership - Vention and Universal Robots expand cell-design platform

  The co-branded environment supports end-to-end UR cell configuration and quoting. It uses Vention MachineBuilder and a marketplace of vetted UR+ components. Automate 2026 demonstrations showed the expanded integration.

  Source
• 2026-06-22 - Partnership - Vention and Teradyne optimize digital twins for UR cells

  MachineBuilder models UR robotic cells. The collaboration connects Vention and Teradyne Robotics workflows. The companies announced the work on 22 June 2026.

  Source
• 2026-06-16 - Deployment - Technicon deploys modular UR7e filling line at GMPack

  The turnkey setup has three modular cream-filling units, each combining two UR7e cobots in a coordinated workflow. Within each module, one cobot positions empty containers and the second applies caps and places finished products; integrated printing supports batch traceability. The line reduces process variability, improves hygiene control, increases production capacity without added headcount and supports scalable high-mix manufacturing.

  Source
• 2026-06-08 - Demonstration - Teradyne Robotics stages physical-AI demos at Automate 2026

  The booth included hourly PolyScope X demos for AI-ready robotics workcell control. Partner demos used UR robots for imitation learning, cable insertion, sanding, machine tending and bin-picking tasks. MiR demos showed mobile material flow with pallet-jack and mobile-cobot configurations rather than a customer deployment claim.

  Source
• 2026-04-22 - Partnership - Flex and Teradyne Robotics expand global manufacturing partnership

  Flex will provide advanced manufacturing and supply-chain services for both Universal Robots and Mobile Industrial Robots. The programme covers collaborative robot arms and autonomous mobile robots rather than a single model. Flex contributes global engineering, production, supply-chain, logistics and lifecycle capabilities to the expanded programme.

  Source
• 2026-04-10 - Deployment - Bene Solutions deploys COBOT++ heavy-load depalletising system

  The system enables collaborative handling of loads above 20 kilograms. It reduced a workstation burden where operators had handled up to two tonnes per day. The project combined Bene Solutions, Saunier Duval and IRT Jules Verne over nearly two years of development.

  Source
• 2026-03-16 - Product Launch - Universal Robots and Scale AI launched UR AI Trainer, an imitation-learning system combining UR…

  UR AI Trainer combines Universal Robots cobots with human-demonstration data. Scale AI training cells generate the imitation-learning examples used by the system.

  Source
• 2026-02-27 - Deployment - Nordbo Robotics brings Mimic powder-coating touch-ups into production at Assars

  The installation combines Mimic with an ATEX-approved Universal Robots cobot and complements Assars' existing GEMA coating booth. Robot utilisation reached 90% within three weeks of installation and the company reports that the system now runs at 100%. Assars reported a 25% reduction in powder consumption alongside improved consistency and working conditions.

  Source
• 2026-01-15 - Demonstration - Hypersen demonstrates UR cobot screw fastening with force feedback

  A Universal Robots cobot performed screw fastening with Hypersen six-axis force-torque feedback. The sensor measured contact forces and torques across the XYZ coordinate system. Force feedback enables the robot to regulate fastening contact and compensate for fixture variation.

  Source
• 2026-01-06 - Demonstration - Universal Robots, Robotiq and Siemens showcase digital-twin palletizing cell

  CES 2026 showcase combined UR, Robotiq and Siemens automation components. Solution pairs Robotiq PAL Ready with the UR20 collaborative robot arm. Siemens Digital Twin Composer supported virtual configuration and validation.

  Source
• 2025-12-02 - Demonstration - NUTAI demonstrates sheet-metal inspection at WeAreCobots Valencia

  NUTAI demonstrated its surface-defect inspection and sheet-metal quality-control system live. The system maximized image contrast and minimized noise while detecting defects in real time. Universal Robots listed NUTAI among more than ten participating metal-industry solution partners.

  Source
• 2025-10-06 - Product Launch - Universal Robots launches UR18 cobot with MotionPlus

  The compact arm provides 950 mm reach and maximum tool-centre-point speed of 4 m/s for handling and assembly cells. A roughly 39 kg arm allows mounting on standard gantry systems. The launch includes upgraded freedrive, OptiMove and MotionPlus motion-control capabilities.

  Source
• 2025-09-16 - Deployment - E-COBOT deploys autonomous cobot palletizing cell at CAVAC

  The cell combines a Universal Robots UR10e, a bag-specific Joulin vacuum gripper and Robotiq’s PE10 lifting and palletizing kit. It places up to 600 kilograms of five-kilogram bags into pallet boxes every 15 minutes while protecting the flexible packaging. Safety scanners create slowdown and stop zones, enabling near-autonomous operation without fixed perimeter barriers.

  Source
• 2025-05-13 - Production Milestone - Universal Robots reaches 100,000 cobots sold worldwide

  Universal Robots announced that it had surpassed 100,000 cobots sold globally. The company framed the milestone as evidence of collaborative robotics moving from early adoption into large-scale industrial deployment. The figure reflected accumulated production and installed-base scale rather than a single customer or one-off shipment.

  Source
• 2025-05-12 - Product Launch - Universal Robots introduces UR15 high-speed cobot

  UR15 was introduced at Automate 2025 in Detroit. The cobot offers maximum TCP speed of 5 m/s. Universal Robots said UR15 can deliver up to 30% cycle-time improvement in pick-and-place applications.

  Source
• 2025-03-20 - Demonstration - 3D Infotech demonstrates AI-driven robotic inspection at NVIDIA GTC

  The setup used NVIDIA Jetson Orin and the Universal Robots PolyScope X environment for edge AI and robot control. Computer vision supported defect detection while AI models reduced programming effort and adapted inspection motion. 3D Infotech said its broader metrology-automation installed base exceeded 350 systems, primarily in aerospace and automotive manufacturing.

  Source
• 2025-03-17 - Partnership - Universal Robots and Mobile Industrial Robots present joint AI and automation strategy

  Universal Robots and MiR jointly highlighted combined internal-logistics and manipulation workflows as part of a broader Teradyne robotics strategy. The pairing reinforced a shared go-to-market story around mobile manipulation and integrated industrial automation rather than isolated robot cells. This is a meaningful partnership signal because both companies are presented as coordinated technology layers inside the same automation stack.

  Source
• 2024-10-21 - Product Launch - Universal Robots launches the AI Accelerator

  Universal Robots launched the AI Accelerator as a hardware and software toolkit for AI-powered cobot development. The company positioned it as an extensible platform to speed application development, reduce time to market, and connect cobots more directly to physical AI workflows. The release marked a clear product step beyond standard cobot hardware into AI-enablement infrastructure for developers and researchers.

  Source
• 2024-10-21 - Partnership - Orbbec integrates Gemini 335Lg into UR AI Accelerator

  The Gemini 335Lg uses GMSL2 and FAKRA connectivity, carries an IP65 rating and supports synchronized multi-camera operation. The UR AI Accelerator combines the camera with PolyScope X, NVIDIA Isaac libraries and models, and Jetson AGX Orin compute. The announced integration applies to the UR AI Accelerator developer platform.

  Source
• 2024-07-11 - Deployment - Drim Robotics commissions UR20 beam-tightening cell at Stellantis

  The UR20 tightened a structural beam during assembly of Fiat 600 and Alfa Romeo Junior vehicles. Drim commissioned the cobot directly on the Stellantis production line in Tychy. The documented application establishes a completed automotive deployment rather than a laboratory demonstration.

  Source
• 2024-03-18 - Deployment - Drim Robotics deploys UR10 machine-tending cell at BOS Tychy

  The UR10 e-Series cobot tended a washing machine processing parcel-shelf support tubes. Drim engineered an advanced feeder and coordinated the cobot with several connected machines. The complete cell was simulated and presented for customer acceptance before commissioning.

  Source
• 2024-01-04 - Partnership - Percipio 3D cameras receive Universal Robots UR+ certification

  UR+ certification covered compact Percipio PS- and FS-series cameras for collaborative robot applications. The cameras mount at robot wrists to provide point clouds for picking, loading and assembly. Percipio RVS software links compatible cameras and Universal Robots cobots through graphical programming.

  Source
• 2023-07-06 - Demonstration - Sysaxes concludes Collaborate Tour at its Allenjoie premises

  Sysaxes hosted the fifth and final scheduled tour stop at its Allenjoie premises on July 6, 2023. The program let manufacturers discover collaborative robotics through concrete applications and demonstrations. The Allenjoie date followed Sysaxes-organized stops in Lyon, Auxerre, Sarrebourg and Clermont-Ferrand.

  Source
• 2023-06-29 - Demonstration - Sysaxes and C2i Meca stage collaborative-robot demonstrations

  Sysaxes and C2i Meca held the Collaborate Tour stop on June 29, 2023. The hosts demonstrated multiple collaborative-robot applications to manufacturers and automation users. The program also included regional company testimony and opportunities to test cobots and assess automation projects.

  Source
• 2023-06-22 - Demonstration - Sysaxes and RobotIndus demonstrate cobot applications in Sarrebourg

  Sysaxes and certified integrator RobotIndus held the demonstration day in Sarrebourg on June 22, 2023. The program showed multiple collaborative-robot applications for manufacturers across different sectors. Demonstrations emphasized productivity, quality and flexibility gains from cobot deployment.

  Source
• 2022-12-05 - Product Launch - Colbotic launches ColWeld cobot-programming software

  Colbotic introduced ColWeld software for programming a Universal Robots UR10 welding cobot. Its custom URCap simplified welding paths so operators could program the robot directly. Universal Robots marketplace independently lists Colbotic as the ColWeld solution supplier.

  Source
• 2022-07-23 - Regulatory - Hypersen HPS-FT force-torque sensors obtain UR+ certification

  Universal Robots certified Hypersen's HPS-FT series for use in the UR+ collaborative-robot ecosystem. The sensors measure force and torque across three axes and support EtherCAT, Ethernet and emergency-stop integration. Hypersen identified force-controlled polishing, precision assembly, palletising and robot teaching among the supported applications.

  Source
• 2022-06-24 - Deployment - PCC Robotics deploys UR10e machine-tending cell at WST Fab

  The cell combined the UR10e, end-of-arm tooling, part staging and full CNC-machine integration. WST Fab reprogrammed the cobot, adapted the fixturing and printed new grippers within days. The customer subsequently used the system across a dozen parts after PCC provided onsite training.

  Source
• 2022-02-17 - Deployment - Uniwelco completes RBCobot welding deployment at Guldmann

  Guldmann selected an RBCobot with MIG/MAG torches for stainless-steel and black-steel production welding. Uniwelco completed implementation before handing independent operation to Guldmann's own welders. The system combined a Universal Robots arm, Boehler welder, Siegmund table and Uniwelco URCap.

  Source
• 2022-02-10 - Regulatory - Uniwelco RBCobot earns Universal Robots UR+ certification

  Universal Robots approved RBCobot for user-friendliness and integration within the UR+ ecosystem. The certified kit combined a CE-marked welding package with Uniwelco's URCap control software. URCap functions covered looping, offsets, stitching, weaving, circular welds and live electrical adjustment.

  Source
• 2022-01-17 - Deployment - CATEK adds second Uniwelco welding robot after four days

  CATEK bought a second welding robot after the first RBCobot had operated for four days. The replacement arrived the following Tuesday and entered service without a lengthy integration cycle. Easy programming let staff move different tasks onto cobots and insource previously outsourced welding work.

  Source
• 2021-10-18 - Demonstration - Sysaxes opens its premises for three-day cobotics showcase

  An inauguration evening on October 18 preceded three open-house days from October 19 to 21, 2021. More than 100 visitors saw roughly ten applications featuring cobots, mobile robots, feeders and end-of-arm tools. Named participating partners included Universal Robots, MiR, OnRobot, Asyril, Robotiq and SCHUNK.

  Source
• 2021-06-29 - Partnership - Siemens SIMATIC Robot Library integrates Nachi robots into TIA Portal

  The SIMATIC Robot Library provided robot-control function blocks inside TIA Portal, while the Robot Integrator added standard HMI-based teaching. Nachi and Universal Robots had joined Siemens' multi-vendor collaboration alongside ABB, Comau, Epson, FANUC, Kawasaki, KUKA, Panasonic, STÄUBLI, Techman Robot and Yamaha. Early pilots included iNDAT Robotics and Siemens' Amberg electronics factory, where a common interface was intended to simplify operation and service across different robot systems.

  Source
• 2021-04-29 - Product Launch - NUTAI launches MAD Controller for external robot axes

  MAD Controller lets Universal Robots users command up to four external Festo axes. Operators configure linear axes, rotary tables and storage systems without separate PLCs or HMIs. Universal Robots marketplace later listed NUTAI as the product supplier and integration partner.

  Source
• 2021-04-06 - Deployment - Uniwelco RBCobot enters production at Kurt Jensen Maskinfabrik

  The UR-based RBCobot began welding valve housings after a 20-minute first programming session. Operators used the collaborative cell for thousand-piece runs and batches as small as 50. Kurt Jensen reported cheaper output, improved uniformity and plans for a second welding robot.

  Source
• 2020-10-28 - Product Launch - Drim Robotics develops mobile disinfection cobot platform

  The platform combines a Universal Robots UR5 arm with a MiR100 autonomous mobile base. Cloud software remotely manages disinfectant spraying across large indoor areas without exposing workers. Universal Robots identified Drim as the certified Polish integrator that developed the application.

  Source
• 2020-06-06 - Capability - AIRGATE remote-access software enters Knotts robot quotations

  ARCS basic used a GSM modem to notify operators when a robot exceeded defined limits or stopped unexpectedly. ARCS rm streamed the PolyScope interface through an encrypted VNC connection, enabling authorised remote diagnosis and operation. Robot-side controls included access enablement, an optional VNC password, an automatic shutoff timer and a warning lamp.

  Source
• 2019-10-15 - Deployment - Vnstar and Servo Dynamics deliver UR10 automation at VMIC

  VMIC’s engineering team completed the integration in 25 to 30 days after three days of classroom training and two days of hands-on instruction. The cobots increased productivity by two to three times while improving consistency in mining-vehicle component production. VMIC reported a 50 to 60 percent increase in orders after the automation was introduced.

  Source
• 2019-04-09 - Partnership - NUTAI becomes a Universal Robots Certified System Integrator

  Universal Robots presented the certification plaque on Advanced Factories 2019 opening day. The credential placed NUTAI within the manufacturer recognized network of qualified cobot integrators. NUTAI cited more than twenty-four years of industrial automation integration experience.

  Source
• 2018-10-02 - Deployment - Schaeffler deploys Universal Robots collaborative robots in manufacturing operations

  Collaborative robots introduced to support flexible automation in component manufacturing. Systems assist with repetitive tasks and precision handling operations. Deployment reflects Schaeffler's push toward modular automation across production facilities.

  Source
• 2017-10-07 - Deployment - Beijing BAI Lear expands automotive production with 38 UR10 cobots

  The installation covered 38 UR10 cobots across multiple Chinese plants. Applications included screwdriving, electrical inspection and pick-and-place. The cobots supported production of automotive seating-system components.

  Source
• 2017-02-14 - Demonstration - Simplimatic demonstrates three-robot electronics assembly line at IPC APEX

  The live line ran at IPC APEX in San Diego from February 14 to 16, 2017. Two FANUC robots placed heat sinks and built a Raspberry Pi enclosure before a UR3 disassembled it for another cycle. The booth also demonstrated Cimtrak PCB handling, laser marking and board-traceability systems.

  Source
• 2016-11-01 - Capability - Leaderdrive begins batch harmonic-reducer supply to Universal Robots

  The prospectus says Universal Robots contacted Leaderdrive in 2014, tested samples and placed small orders in 2015. Leaderdrive and Universal Robots signed a framework agreement in November 2016, after which batch supply began. Universal Robots was Leaderdrive's largest 2019 overseas customer for harmonic reducers in the prospectus sales table.

  Source
• 2015-06-11 - Acquisition - Teradyne completes $315.437M acquisition of Universal Robots

  Teradyne acquired all outstanding equity of Universal Robots on June 11, 2015. The filed acquisition-date purchase price was $315.437 million: $283.8 million cash plus $31.6 million of contingent consideration at initial fair value. A separately disclosed maximum earnout of $65 million was not included in the filed acquisition-date purchase price.

  Source
• 2015-05-18 - Acquisition - Teradyne announces agreement to acquire Universal Robots

  Teradyne to acquire Universal Robots for $285M plus $65M based on performance targets through 2018. Universal Robots sold over 4,000 collaborative robots, leading a $100M market growing over 50% annually. Teradyne is an industrial technology company with robotics exposure through Universal Robots and Mobile Industrial Robots, alongside automated test equipment.

  Source
• 2014-01-01 - Deployment - Orkla Foods automates vanilla-cream carton packing with a UR10

  The UR10 handled cartons on the vanilla-cream line at Kumla. The cell automated a repetitive packing workflow. The case study reported a six-month return on investment.

  Source

Relationships

• Scale AI

  Technology Partner - Universal Robots and Scale AI launched the UR AI Trainer imitation-learning system.

• Rapid Robotics

  Cobot Partner - Rapid Robotics became a Universal Robots channel partner and used UR cobots in preconfigured workcells.

• Hypersen

  Ur+ Certified Sensor Ecosystem Partner - Universal Robots granted UR+ certification to Hypersen HPS-FT force-torque sensors and lists HPS-FT060E in its Marketplace.

• Smooth Robotics

  Qualified Robotics Graph Fact - Universal Robots and Smooth Robotics established a partner relationship around Smooth Robotics cobot-welding systems.

• Basler

  Compatible Robotics Integration - Basler products support Universal Robots robot applications.

• ifm

  Ur+ Vision Integration - ifm O3D vision sensors support Universal Robots through a URCap integration.

• Skild AI

  Integrates With - Skild AI partners with Universal Robots to integrate Skild Brain into collaborative robot portfolios.

• 3D Infotech

  Robotic Inspection Integration - 3D Infotech integrated its robotic inspection workflow with the Universal Robots AI Accelerator and PolyScope X environment.

• Simplimatic Automation

  Collaborative Robot Integration Platform - The named robotics company is explicitly connected to Simplimatic in the dated source.

• Drim Robotics

  Respiro Vacuum Gripper System Compatibility - UR Marketplace lists Drim Robotics Respiro as a vacuum gripping system configurable through a URCap.

• Multiply Labs

  Documented System Integration - Multiply Labs cell-therapy robotic cluster uses UR12e cobots for cleanroom manipulation.

• MBO Postpress Solutions

  Cobo Stack Palletizing System Compatibility - UR Marketplace lists MBO CoBo-Stack as a Universal Robots-based palletizing system.

• ECOSPHERE Automation

  Eco Linear Axis Compatibility - UR Marketplace lists ECOSPHERE ECO linear axis as a UR-compatible range extender for Universal Robots cells.

• MathWorks

  Matlab And Simulink Support Package Compatibility - UR Marketplace lists MATLAB for Universal Robots as a support package for MATLAB and Simulink robot workflows.

• Spin Robotics

  Sd Series Collaborative Screwdriver Compatibility - UR Marketplace lists Spin Robotics SD-Series as a screwdriving system for Universal Robots collaborative assembly.

• Mech-Mind Robotics

  Mech Mind 3d Vision Package Compatibility - UR Marketplace lists Mech-Mind 3D Vision with a plug-and-play URCap for Universal Robots integration.

• Viska Systems

  Visable Robotic Vision Inspection Software Compatibility - UR Marketplace lists Viska Systems Visable as a robotic vision inspection system for Universal Robots.

• Cognex Corporation

  Plugin Integration - Cognex's official integration note documents its 2D robot-guidance systems integrating with Universal Robots through a URCap.

• Inxpect

  Safety Radar Equipment Compatibility - UR Marketplace lists Inxpect safety radar products for collaborative cobot danger-area monitoring.

• Canon Machine Vision

  Canon Rv Series 3d Machine Vision System Compatibility - UR Marketplace lists Canon RV Series 3D Machine Vision System for Universal Robots picking and recognition applications.

• Aruna Robotics

  Aruna Vision 3d Machine Vision Package Compatibility - UR Marketplace lists Aruna Vision as a UR-compatible 3D machine-vision package for inspection and robot guidance.

• Cobot Lift

  Cobot Lift Material Handling System Compatibility - UR Marketplace lists Cobot Lift as a payload-boosting material-handling system for Universal Robots cobots.

• wenglor

  Smart Camera B60 Compatibility - UR Marketplace lists wenglor Smart Camera B60 as a 2D camera that communicates directly with UR robots through a URCap.

• Smart Robots

  3d Smart Assistant Compatibility

• Alsontech

  Alsontech 3d Vision System Compatibility - UR Marketplace lists Alsontech 3D Vision System for Universal Robots bin-picking and positioning applications.

• Gimatic

  Kit Ur J Electric Two Finger Gripper Compatibility - UR Marketplace lists Gimatic KIT-UR-J as a gripper for all listed UR collaborative robot models.

• PushCorp

  Sand X Solution Compatibility - UR Marketplace lists PushCorp Sand X Solution for Universal Robots surface-finishing applications.

• VersaBuilt

  Robot2cnc Mill Edition Compatibility - UR Marketplace lists VersaBuilt Robot2CNC Mill Edition as a URCap-enabled controller for CNC automation.

• EMI Corp.

  Emi Gripper Kit Sx Compatibility - UR Marketplace lists EMI Gripper Kit SX as a pre-assembled pneumatic gripper kit with URCap software.

• Schmalz

  Compatible Integration - Schmalz offers ready-to-connect handling sets for Universal Robots, including gripper, flange and connection cable.

• Oxford Vision & Sensor Technology

  Glazer 2d And 3d Vision Package Compatibility - UR Marketplace lists Oxford Vision & Sensor Technology Glazer vision software for Universal Robots applications.

• Rocketfarm

  Pally Palletizing Software Compatibility - UR Marketplace lists Rocketfarm Pally as palletizing software installed and calibrated through a URCap.

• Rapid Design Solutions

  Rapid Vise Ur+ Kit Compatibility - UR Marketplace lists Rapid Design Solutions Rapid Vise UR+ Kit for cobot-controlled CNC vise actuation.

• PHD

  Flexion Pneu Connect Gripper Compatibility - UR Marketplace lists PHD Flexion Pneu-Connect as a pneumatic gripper package for Universal Robots.

• Balluff

  Palletizing Demonstration Integration - Balluff sensing and identification components are integrated in a Universal Robots palletizing station.

• Solomon 3D

  Accupick Lm Vision Software Compatibility - UR Marketplace lists Solomon AccuPick LM as a UR+ product for machine tending and pick-and-place applications.

• OLP Robotics

  Wecobot Welding System Compatibility - OLP Robotics integrates Universal Robots cobots into its WeCobot welding packages and provides installation, training and service.

• DEPRAG

  Deprag Plus Screwdriving System Compatibility - UR Marketplace lists DEPRAG Plus as a screwdriving system for Universal Robots collaborative assembly cells.

• NexCOBOT

  Robot Gateway Integrator Compatibility - UR Marketplace lists NexCOBOT Robot Gateway Integrator for connecting Universal Robots systems with factory networks.

• qbrobotics

  Qb Softclaw Adaptive Gripper Compatibility - UR Marketplace lists qbrobotics qb SoftClaw as a adaptive gripper for Universal Robots.

• NUTAI

  Cobotvnc Remote Access Urcap Compatibility - UR Marketplace lists NUTAI CobotVNC as URCap software for remote teach-pendant access.

• Robatech

  Ur+ Integration Kit For Adhesive Application Systems Compatibility - UR Marketplace lists Robatech UR+ Integration Kit for connecting adhesive application systems with Universal Robots cobots.

• RoboDK

  Robodk Simulation And Offline Programming Software Compatibility - UR Marketplace lists RoboDK Simulation Software for programming and simulating Universal Robots cobots.

• UND / Magbot

  Magbot Automatic Tool Changer Compatibility - UR Marketplace lists UND Magbot automatic tool changers for Universal Robots cobots.

• ESTIC

  Estic High Torque Screwdriving Solution Compatibility - UR Marketplace lists ESTIC high-torque screwdriving equipment for Universal Robots fastening applications.

• Nordbo Robotics

  Nrs 6 Force Torque Sensor Kit Compatibility - UR Marketplace lists Nordbo NRS-6 Force/Torque Sensor kit for Universal Robots force-sensitive applications.

• robominds

  Robobrain.eye AI Vision Package Compatibility - UR Marketplace lists robominds robobrain.eye as AI vision software for Universal Robots automation.

• SensoPart

  Visor Robotic 2d Guidance Sensor Compatibility - UR Marketplace lists SensoPart VISOR Robotic as a 2D guidance sensor and URCap for Universal Robots applications.

• ONExia

  Palletizur Palletizing System Compatibility - UR Marketplace lists ONExia PalletizUR as a turnkey Universal Robots palletizing system.

• Southwestern PTS

  Easy Pick And Drive Screwdriving Package Compatibility - UR Marketplace lists Southwestern PTS Easy Pick and Drive as a screwdriving package for Universal Robots.

• Percipio

  Percipio 3d Camera Package Compatibility - UR Marketplace lists Percipio 3D Camera for code-free camera and robot operation with Universal Robots.

• AIM Robotics

  Aim Sd 30/55 Syringe Dispenser Compatibility - UR Marketplace lists AIM Robotics SD 30/55 as a airless syringe dispensing end-effector for Universal Robots.

• Cobotracks

  Linear Motion Kit Compatibility - UR Marketplace lists Cobotracks Linear Motion Kit as a URCap-controlled range extender for Universal Robots.

• ALCA Technologies

  Alca Palletizer Compatibility - UR Marketplace lists ALCA Palletizer as a Universal Robots-compatible palletizing system.

• WeCobot

  Wecobot Welding Kit Fronius Compatibility - UR Marketplace lists WeCobot Welding Kit Fronius for connecting Fronius welding equipment with Universal Robots cobots.

• Olympus Technologies

  Ur Cobot Welding System Compatibility - UR Marketplace lists Olympus Technologies UR Cobot Welding System as a Universal Robots-based welding cell.

• SABO Electric

  Certified Cobot System Integrator - SABO Electric is a certified Universal Robots system integrator and deploys Universal Robots cobots in customer automation systems.

• Pickit

  Pickit 3d Vision Systems Compatibility - UR Marketplace lists Pickit 3D Vision Systems with a URCap plugin for Universal Robots vision-guided tasks.

• Uniwelco

  Rbcobot Welding System Compatibility - UR Marketplace lists Uniwelco RBCobot as a welding package for Universal Robots collaborative robot cells.

• Vectis Automation

  Vectis Cobot Welding Tool Compatibility - UR Marketplace lists the Vectis Cobot Welding Tool as a UR10e-powered robotic welding system with Vectis URCap software.

• Cambrian Robotics

  Cambrian Vision System Compatibility - UR Marketplace lists Cambrian Vision System as a vision package for Universal Robots bin-picking, pick-and-place and machine-feeding tasks.

• New Scale Robotics

  Nsr Pg 10 20 Ure Precision Gripper/caliper Compatibility - UR Marketplace lists New Scale Robotics NSR-PG-10-20-URe as a UR flange-mounted precision gripper/caliper.

• Sysaxes

  Sysapps.csv Data Logging Urcap Compatibility - UR Marketplace lists Sysaxes SysApps.CSV as a URCap for creating CSV files from Universal Robots program variables.

• Groundlight

  Groundlight Visual Inspection And Anomaly Detection Compatibility - UR Marketplace lists Groundlight visual-inspection software and compute module for Universal Robots programs.

• FerRobotics

  Easy Finishing Kit Compatibility - UR Marketplace lists FerRobotics Easy Finishing Kit for Universal Robots sanding, polishing and deburring workflows.

• Wiretank

  Wiretank Joystick Compatibility - UR Marketplace lists WireTank Joystick as a plug-and-play movement-control accessory for UR e-Series robots.

• CAPTRON

  Tcp Calibration Sensor Compatibility - UR Marketplace lists CAPTRON TCP Calibration Sensor for tool-center-point checking with Universal Robots.

• GYS

  Gys Urcap Mig And Robotic Mig/mag Power Source Interface Compatibility - UR Marketplace lists GYS URCAP MIG as a welding interface compatible with GYS robotic MIG/MAG power sources.

• Rollon

  Ctu Cobot Transfer Unit Compatibility - UR Marketplace lists Rollon CTU Cobot Transfer Unit as a linear axis for Universal Robots systems.

• Colbotic Automation

  Colweld Welding System Compatibility - UR Marketplace lists Colbotic ColWeld as a Universal Robots-based cobot welding system.

• Atlas Copco

  Power Focus Tightening Integration Compatibility - UR Marketplace lists Atlas Copco Power Focus integration for fastening with Universal Robots cobots.

• Zivid

  3d Camera Compatibility - Zivid 2+ 3D cameras are used in a robot-guidance solution documented as compatible with Universal Robots.

• Bosch Rexroth

  Platform Support - Bosch Rexroth documents ctrlX and Fuzzy RTOS integration with Universal Robots.

• Mercedes-Benz Group

  Cobot Deployment - Mercedes-Benz deployed a Universal Robots UR10e cobot for automated glue application at its Juiz de Fora factory.

• Poujoulat

  Documented Robot Deployment - MG Maintenance integrated a UR10 cell for forming cardboard chimney caps at Poujoulat.

• Schaeffler AG

  Deployment Partner - Schaeffler uses a Universal Robots UR5e with ActiNav for bin picking at its Cheraw manufacturing facility.

• Viam

  Marine Sanding Automation Partnership - Universal Robots and Viam partner on robotic marine sanding systems combining UR cobots with Viam software.

• Labman Automation

  Cobot Integration Partner - Labman joined Universal Robots Certified Systems Integrator network for collaborative robot integration.

Comparable profiles

• FANUC

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• ABB

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• JAKA Robotics Co., Ltd.

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• KUKA

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• ABB Robotics

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• Flexiv Robotics Ltd.

  comparable profile - Collaborative Robot Arm Builder

• Sichuan Tianlian Robotics Co., Ltd.

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• Comau

  comparable profile - Collaborative Robot Arm Builder · Industrial Robot Arm Builder

• Niryo

  comparable profile - Collaborative Robot Arm Builder

• Elite Robots

  comparable profile - Collaborative Robot Arm Builder

• AUBO Robotics

  comparable profile - Collaborative Robot Arm Builder

• Huayan Robotics

  comparable profile - Collaborative Robot Arm Builder

Shared workflows

• VMECA

  workflow adjacency - End Of Arm Tooling · Industrial Pick And Place

• RORZE Corporation

  workflow adjacency - Industrial Pick And Place

• Automation Technology

  workflow adjacency - Machine Tending

• Svaya Robotics

  workflow adjacency - Industrial Pick And Place

• Schweitzer Engineering Laboratories

  workflow adjacency - Industrial Pick And Place

• INACAP

  workflow adjacency - Industrial Pick And Place

• BMO Automation

  workflow adjacency - Machine Tending

• Zimmer Systems

  workflow adjacency - End Of Arm Tooling

• SCHUNK

  workflow adjacency - End Of Arm Tooling

• OnRobot

  workflow adjacency - End Of Arm Tooling

• qbrobotics

  workflow adjacency - End Of Arm Tooling

• ATI Industrial Automation

  workflow adjacency - End Of Arm Tooling

Context tags

• Collaborative safety control - Capability - UR cobots are designed for force-limited human-adjacent collaboration.
• Collaborative robot arm builder - Peer Group - Universal Robots is the leading collaborative robot arm platform.
• Industrial pick and place - Workflow - UR cobots perform pick-and-place, sorting and part transfer.
• Machine tending - Workflow - UR cobots load and unload CNC machines and production equipment.
• Palletizing and packaging - Workflow - UR cobots support palletizing, depalletizing and packaging workflows.
• Industrial motion control - Capability - UR cobots execute programmed industrial motion paths.
• Robot arm OEM - Stack Layer - Universal Robots builds complete collaborative robot arm systems.
• Manipulation software platform - Stack Layer - UR+ provides application tooling and programming ecosystem for UR arms.
• End-of-arm tooling - Workflow - UR cobots use grippers, sensors and end-of-arm tooling through UR+ ecosystem.
• Industrial robot arm builder - Peer Group - UR cobots are used in industrial pick-and-place, machine tending and assembly.
• Factory automation cells - Customer Environment - UR cobots are deployed in factory automation cells.